Current Category : The Piranha - Go to Category Index | Search.

From this page you can securely order parts for the Piranha. You may cick here for comprehensive information on the Piranha or click here to go to the plans ordering page.

Instructions: Scroll down the list of parts and find the item or items that you want. For each part enter the quantity that you want and click on the "buy" button displayed for that item. You will then be taken to your current purchase list, and that item should have been added. If you need to order more click back button on your browser and and do the same for each item. However, if at this stage that is all you want to buy click on 'check out'. You will then be asked to fill out your information on a secure server.

All Prices are in Australian Dollars. ( USA residents will only pay approx 75% of list prices quoted due to exchange rates. ) Note: Our Australian dollar is only worth around 75 cents to the US dollar, that means USA residents will only pay around half the price shown here in Australian dollars.

Your Computer: If this page is not working as you think it should please make sure your internet browser has javascript enabled. Our javascript is harmless and enabling javascript can be done for just the time you are at our site if you wish. But generally it is enabled by default. If your not sure how to enbable it please try (in Internet Explorer) going to Tools > Options then the Security Tab where you can set it back to 'Default' or enabling 'Active Scripting'.

	PIR01		QTY:
	Chassis fully welded & drilled with rollbars & all brackets. Includes part PIR02 Rear end welded in.

	PIRPAC		QTY:
	Chassis frame pack, pre cut & drilled, pre-bent rollbars & all mount brackets, (PIR20) Just needs welding. (this kit not required if ordering PIR01).

	PIRDAPAC		QTY:
	Chassic frame pack with Double a arm rear housing, pre cut & drilled, pre-bent rollbars & all mount breaketc, Just needs wleding (this kit not required if ordering PIR01 or PIRPAC).

	ROLL2-DUP2		QTY:
	Rollbars, front & rear, (not required if ordering PIR01 or PIRPACK)

	PIR20		QTY:
	Laser cut bracket kit for Chassis only. 41 parts. Includes PIR02 rear housing, front and rear shock mounts, coloumn mounts, harness mounts, front arm mounts, pivot pin retainers. (Not required if ordering PIRPACK or PIR01).

	PIR21		QTY:
	Same as PIR20 laser cut bracket kit, but includes DA01 Double A arm rear housing (Not required if ordering PIRDAPAC or PIR01)

	SW07		QTY:
	Front swing arms, right & left, Fully welded & drilled.

	SW08		QTY:
	Front swing arm pivot bushes, Acetal (4)

	SW09-DUP2		QTY:
	Front swing arm pivot pins with Nyloc nuts & washers, (2)

	BSH12-4-DUP4		QTY:
	Front Stub axle bushes, Acetal, (4)

	STB12-2-DUP3		QTY:
	Front Stub axle bolts, M12 with Nyloc nuts & washers

	STUB-01		QTY:
	Machined pair of plain stub axles, comes with castle nuts, washers & split pins, (not required if ordering STUB032)

	STUB032		QTY:
	Front Stub axles, left & right, welded & drilled with uprights & steering arms, calliper mounts (2). Suit calipers CAL032x2 & wheel hubs FWH-04

	FWH-04-DUP1		QTY:
	Front Wheel hubs with disc rotor mount, alloy, 4 Stud 156mm PCD, includes studs, nuts, bearings & seals, dust caps. Suits Taipan, Sidewinder, Piranha & Barracuda

	SHOCK 390		QTY:
	Front shocks, coilovers, gas filled, heavy duty, 12mm coils, rebuildable, adjustable preload, 390mm eye to eye. (2)

	SHOCK 750R		QTY:
	Rear shocks, coilover, gas filled, heavy duty, 12mm coils, rebuildable, 750mm eye to eye. (2) Suits Piranha series II.

	DA07-DUP1		QTY:
	Rear shock mount spacers, set of 8, for rear shocks

	SW30-DUP1		QTY:
	Steering rack mount, suits Ford Escort rack

	ESCORTBSH		QTY:
	Steering bush that fits in cut off side of Ford Escort rack & pinion. (steel)

	SB02-DUP1		QTY:
	Steering boss, 3 hole mount, 22mm centre, welds on

	HYP12-DUP1		QTY:
	Steering column pivot bushes & clamps

	STW-01-DUP5		QTY:
	Steering wheel, 3 spoke poly moulded, 11”, 3 hole

	PF58G-DUP1		QTY:
	Steering tie rod ends, ½” UNF female, nylon inserts, studded shanks with ½” UNF Nyloc nuts.

	MSC-01-DUP1		QTY:
	Master cylinder, 5/8” Girling type, fits pedal box

	BB01		QTY:
	Banjo bolt with 2 x crush washers. (2 req'd)

	PSHROD-DUP3		QTY:
	Pushrod & clevis for master cylinder

	PEDBOX-2-DUP1		QTY:
	Brake Pedal box complete with pedal, pushrod, clevis, Master cylinder. Two of these can be used together for front & rear brakes

	PEDBOX-3-DUP1		QTY:
	Throttle Pedal box complete with Pedal, Pedal stop, Return spring & throttle cable connector, Can be used for throttle or clutch pedal

	PEDBOX-DUP2		QTY:
	Pedal box housing used to mount pedla and master cylinder

	PEDAL-DUP3		QTY:
	Pedal, laser cut racing design with acetal pivot bushes. Fits PEDBOX.

	PN07		QTY:
	Throttle cable, 2.3 metres long, can be trimmed to length

	HYP14		QTY:
	Gearchange lever, (same as plan detail)

	C-LEVER-DUP1		QTY:
	Clutch lever, motorcycle shorty type, fits onto gearchange lever for hand clutch

	SW12-DUP1		QTY:
	Fuel tank, steel, 25 litre, left side mounting

	PIR13		QTY:
	Fuel tank, steel, 25 litre, right side mounting

	PIR24		QTY:
	Fuel tank, steel, 15 litres fits in tail of chassis, (not required if using side tanks SW12 & PIR13)

See our Conditions of Sale.

[1] 2 Next Page

Secure ecommerce shopping cart software
and credit card processing provided by ezimerchant