Current Category : The Taipan - Go to Category Index | Search.

From this page you can securely order parts for the Taipan. You may click here for comprehensive information on the Taipan or click here to go to the plans ordering page.

Instructions: Scroll down the list of parts and find the item or items that you want. For each part enter the quantity that you want and click on the "buy" button displayed for that item. You will then be taken to your current purchase list, and that item should have been added. If you need to order more click back button on your browser and and do the same for each item. However, if at this stage that is all you want to buy click on 'check out'. You will then be asked to fill out your information on a secure server.

All Prices are in Australian Dollars. ( USA residents will only pay approx 75% of list prices quoted due to exchange rates. ) Note: Our Australian dollar is only worth around 75 cents to the US dollar, that means USA residents will only pay around half the price shown here in Australian dollars.

Your Computer: If this page is not working as you think it should please make sure your internet browser has javascript enabled. Our javascript is harmless and enabling javascript can be done for just the time you are at our site if you wish. But generally it is enabled by default. If your not sure how to enbable it please try (in Internet Explorer) going to Tools > Options then the Security Tab where you can set it back to 'Default' or enabling 'Active Scripting'.

	ROLL2-DUP1		QTY:
	Rollbars, front & rear. (Not required if ordering Chassis)

	PN02		QTY:
	Front Axle Beam, fully welded. (Not required if ordering Chassis)

	PN03		QTY:
	Front Stub Axles, left & right, welded & drilled with uprights & steering arms

	BSH12-4-DUP5		QTY:
	Front Stub Axle Bushes, Acetal (4)

	STB12-2-DUP4		QTY:
	Front Stub Axle Bolts, 12mm, includes washers & nyloc nuts

	FWH-01-DUP3		QTY:
	Front Wheel Hubs (steel) 5 stud H-T pattern, includes studs, nuts, bearings, seals & dust caps

	PN04		QTY:
	Track Rod ½" UNF threads 1030 steel

	TR18		QTY:
	Steering shaft bushes 16mm bore Acetal (2)

	AXL-02-DUP1		QTY:
	Rear Axle, 1120mm long, 4140 steel with keyways & 4 stud 115mm PCD wheel hubs fitted with studs & nuts

	RWH-02-DUP1		QTY:
	Rear wheel hubs only, Machined from solid, 1 1/4” bore, 4 stud 115mm PCD pattern & 4 stud 101.6mm PCD with studs & nuts  (not required if ordering rear axle)

	UC206-DUP4		QTY:
	Rear Axle Bearings 1 ¼", 1 pair

	P206-DUP1		QTY:
	Rear Axle Bearing Housings, 1 pair

	SB01		QTY:
	Steering Boss, 3 hole mount, 16mm centre

	MSC-01-DUP2		QTY:
	Master Cylinder 5/8" Girling type, fits pedal box or make your own mount

	PSHROD		QTY:
	Pushrod & Clevis for Master Cylinder

	HSE-01-DUP1		QTY:
	Hydraulic Brake Hose, Earls stainless steel braided, 2.1 metres long with Banjo fittings each end

	CAL032-DUP1		QTY:
	Brake Caliper, alloy twin piston for rear brakes, includes bleed screw & Banjo bolt.

	BB-02		QTY:
	Banjo Bolt with crush washers, used to connect brake hose to caliper & Master Cylinder, M10x1.25 thread.

	TX032		QTY:
	Brake calliper mount bracket, suits CAL032 caliper

	PEDBOX 2		QTY:
	Pedal box complete with Pedal, pushrod, Clevis, master cylinder

	PEDBOX 3		QTY:
	Pedal box complete with Pedal, pedal stop, return spring and calble connector. used for throttle or cable clutch pedal

	PN07-DUP1		QTY:
	Throttle Cable, 2.3 metres long, can be trimmed to length

	MHU-01-DUP3		QTY:
	Drive Hub, 1 ¼" Bore, 4 holes on 4" (101.6) PCD. (Suits Disc Rotor & Drive Sprocket). 2 required per buggy

	DBR-02		QTY:
	Disc Brake Rotor, steel, 240 Æ , 5mm thick, slotted, suits MHU-01 Drive Hub, suits most motorcycle motors

	SPR530-50		QTY:
	Rear Sprocket, 50 tooth, 530 pitch, Suits Piranha PIR07 drive hub or Sidewinder MHU-01,  (use either 50, 51, 55 or 60 tooth sprocket).

	SPR-01-DUP1		QTY:
	Drive axle sprocket, 82 tooth, 35-1 3/8" pitch, steel. Suits MHU-01 drive hub, used with industrial motors. Two will be needed on motors 9hp & larger as these motors use a 35-2 double row drive chain.

	CH530-114-DUP4		QTY:
	Drive Chain, 530 pitch, heavy duty motorcycle chain , 114 links with connector

	CH-352-100		QTY:
	35-2 3/8" pitch double row chain, 100 links with connector

	TAV2		QTY:
	Comet TAV30 Torque Converter, ¾" bore, comes complete with driver & driven pulleys, belt, mounting plate & 12 tooth sprocket. (Used on 6hp Vanguard motor), (Replaces older model TAV30)

	TAV30BRK		QTY:
	Stiffener Bracket, bolts between TAV30 & 6hp motor

	40/44		QTY:
	Comet 40 series Torque Converter, 1" bore driver, suits industrial motors up to 16hp. ¾" driven, includes driver & driven pulleys & drive belt

	94/90		QTY:
	Comet 90 series Torque Converter, 1" bore driver, suits industrial motors up to 40hp, includes driver & driven pullys & drive belt

	VANMOUNT		QTY:
	Industrial Engine Mount Plate. This pressed plate is welded to the Chassis, the motor & torque converter then bolt up to the plate. This mount plate accepts 9,11,13,14,16,18 or 20hp Vanguard motors & accepts 40 & 90 series torque converters.

	LAYHEX 40		QTY:
	Layshaft to suit 40 series torque converter, ¾"Æ & keyed for driven pulley, 1" for bearings, includes 15 tooth 35-2 drive sprocket

	LAYHEX 50		QTY:
	Layshaft to suit 90 series torque converter, 1"Æ & keyed for driven pully, includes 15 tooth 35-2 drive sprocket

	LAYBEAR		QTY:
	Layshaft Bearings, 1" bore with housings to bolt to VANMOUNT Engine Mount Plate

See our Conditions of Sale.

[1] 2 Next Page

Secure ecommerce shopping cart software
and credit card processing provided by ezimerchant