Current Category : The Piranha > Piranha Options & Accessories - Go to Category Index | Search.

Instructions: Scroll down the list of parts and find the item or items that you want. For each part enter the quantity that you want and click on the "buy" button displayed for that item. You will then be taken to your current purchase list, and that item should have been added. If you need to order more click back button on your browser and and do the same for each item. However, if at this stage that is all you want to buy click on 'check out'. You will then be asked to fill out your information on a secure server.

All Prices are in Australian Dollars. ( USA residents will only pay approx 75% of list prices quoted due to exchange rates. ) Note: Our Australian dollar is only worth around 75 cents to the US dollar, that means USA residents will only pay around half the price shown here in Australian dollars.

Your Computer: If this page is not working as you think it should please make sure your internet browser has javascript enabled. Our javascript is harmless and enabling javascript can be done for just the time you are at our site if you wish. But generally it is enabled by default. If your not sure how to enbable it please try (in Internet Explorer) going to Tools > Options then the Security Tab where you can set it back to 'Default' or enabling 'Active Scripting'.

	FWH-04-DUP2		QTY:
	Front Wheel hubs with disc rotor mount, alloy, 4 Stud 156mm PCD, includes studs, nuts, bearings & seals, dust caps. Suits Taipan, Sidewinder, Piranha & Barracuda

	DBR032		QTY:
	Front Disc Rotors, 180mm dia, 4mm steel slotted, suits FWH-04 Front Wheel Disc Hubs only. Suits Sidewinder, Piranha & Barracuda.

	STUB032		QTY:
	Front Stub axles, left & right, welded & drilled with uprights & steering arms, calliper mounts (2). Suit calipers CAL032x2 & wheel hubs FWH-04

	CAL032x2		QTY:
	Brake Calipers, matching pair alloy twin piston for front brakes, includes bleed screw & Banjo bolt.

	BB-01		QTY:
	Banjo Bolt with crush washers, used to connect brake hose to caliper & brake hose to master cylinder M10x 1.25.

	HSE-03		QTY:
	Front Hose set up. Runs from Master Cylinder to both front calipers, braided stainless hose

	PEDBOX-2-DUP3		QTY:
	Brake Pedal box complete with pedal, pushrod, clevis, Master Cylinder NOTE: We run separate pedal box for front & rear brakes. Both pedals can be pressed together & by rocking your foot you can control front to rear braking.

	BRAKE KIT		QTY:
	All the above parts to set up Front Brakes, includes all nuts & bolts NOTE: 10x5" Rims (WRQ-01) must be used with front brakes.

	XRV RACK		QTY:
	Rack and Pinion. 1/2 turn lock, with adjustable gear mesh. Includes tie rods to suit Sidewinder and Piranha as well as input shaft adaptor

	RACKMNT		QTY:
	Rack and Pinion weld in mount plate to suit XRV Rack and Pinion for Sidewinder and Piranha

	VACPUMP		QTY:
	Vacuum pump, Mikuni. Pumps 14 litres per hour, runs off inlet manifold vacuum. Easy to install, no electricity required

	VACPUMP 2-DUP1		QTY:
	Vacuum pump, Heavy duty, Mikuni. Pumps 35 litres per hour, runs off inlet manifold vacuum. 2 outlets, Easy to install, no electricity required

	F-BULB		QTY:
	Fuel primer bulb, hand operated outboard motor type. Used to prime vacuum pump between fuel tank and pump

	TIEDOWN		QTY:
	Motorcycle type Tie Down Straps. We use them for fixing down fuel tanks & for holding your vehicle on the trailer

	BONNET 1		QTY:
	Fibreglass Bonnet, designed for Sidewinder & Taipan. Fits onto top rails. Black Gellcoat finish.

	RACKBOOT		QTY:
	Universal steering rack boot (Use to replace old boots on mini rack & pinion)

	SPROK GUIDE		QTY:
	Guide plates to fit either side of SPR530-50 sprocket to stop chain climbing off. Kit comes with 2X side plates, stand-off spacers & bolts. Used only on Sidewinder

	ROLLER-DUP1		QTY:
	Spare chain tensioner roller. 50mm Dia, Acetal with 2 x roller bearings

	ACCEL SPRING		QTY:
	Accelerator pedal spring, used on all buggies. Heavy duty. Has one swivel end.

	TAP-01		QTY:
	Fuel tap, heavy duty ball valve, chrome plated brass with ¼” BSP female threads each end.

See our Conditions of Sale.

Secure ecommerce shopping cart software
and credit card processing provided by ezimerchant