Current Category : The Barracuda - Go to Category Index | Search.

Instructions: Scroll down the list of parts and find the item or items that you want. For each part enter the quantity that you want and click on the "buy" button displayed for that item. You will then be taken to your current purchase list, and that item should have been added. If you need to order more click back button on your browser and and do the same for each item. However, if at this stage that is all you want to buy click on 'check out'. You will then be asked to fill out your information on a secure server.

All Prices are in Australian Dollars. ( USA residents will only pay approx 75% of list prices quoted due to exchange rates. ) Note: Our Australian dollar is only worth around 75 cents to the US dollar, that means USA residents will only pay around half the price shown here in Australian dollars.

Your Computer: If this page is not working as you think it should please make sure your internet browser has javascript enabled. Our javascript is harmless and enabling javascript can be done for just the time you are at our site if you wish. But generally it is enabled by default. If your not sure how to enbable it please try (in Internet Explorer) going to Tools > Options then the Security Tab where you can set it back to 'Default' or enabling 'Active Scripting'.

	BCRACK		QTY:
	Laser cut rack & pinion mount, 3 plates, (not required if ordering BC!, BC1PAC or BCLAZER).

	BC13		QTY:
	Tie rods to suit XRV rack & pinion, (2).

	BC14		QTY:
	Tie rod insets, 2 x 14mm, 2 x 5/8, (4) (not required if ordering BC13).

	BC15		QTY:
	Steering column, as per plans, with XRV rack adaptor one end & SB03 6 hole flange other end, comes with 8mm Rollpin.

	RAKADP		QTY:
	XRV rack & pinion adaptor, adapts column to XRV rack & pinion, machined steel, comes with 8mm Rollpin (1) (not needed if ordering BC15).

	SB03		QTY:
	Steering wheel flange, 6 x 6.5mm holes on 74mm PCD, (not required if ordering SB04).

	SB04		QTY:
	Steering wheel flange, 6 x 5.5mm holes on 70mm PCD, (not required if ordering SB03).

	CLMNBSH		QTY:
	Column pivot bush, Urathane bush & support clamp, 22mm.

	STW-02		QTY:
	Steering wheel, 13.5” 3 spoke, contoured thumb grips, suits SB03 Flange.

	SHOCK790		QTY:
	Shocks, coilover, gas filled heavy duty, 12mm coils, 790mm eye to eye, (2 shocks) suit front or rear of Barracuda, (2 pairs required for buggy).

	BC16F		QTY:
	Set of front shock spacers, (8) top & bottom.

	BC17R		QTY:
	Set of rear shock spacers, (8) top & bottom.

	HSE-BCR		QTY:
	Rear brake hose, 2800mm long Stainless steel braided with banjo fitting each end.

	BC18		QTY:
	Throttle cable, 2600mm long, can be trimmed to length.

	BC19		QTY:
	Gearshift lever, complete with 2 x Acetal bushes & M12x65 bolt, nyloc nut & washers

	PSHPULL		QTY:
	Push/Pull gearshift cable, complete with M6 female rod ends at each end, 2000mm long.

	C-LEVER-DUP4		QTY:
	Clutch lever, motorcycle shorty type, mechanical cable type, fits onto gearshift lever.

	HYDLEVER		QTY:
	Clutch lever, hydraulic type with remote reservoir, suits engines with hydraulic activated clutch. Fits onto gearshift lever, (not required if ordering C-LEVER).

	HSE-CLH		QTY:
	Hydraulic clutch hose, suits HYDLEVER, stainless braided with banjo fittings each end, 1900mm long.

	BCTANK		QTY:
	Fuel tank, steel, tail mounted, fully welded with filler cap & spout, mount brackets supplied but not welded on.

	FSPOUT		QTY:
	Filler cap & spout, steel spout & stainless steel cap. Spout welds to filler spout tube, (not supplied), (not required if ordering BCTANK).

	BCFITTING		QTY:
	Fuel tank fittings, brass ¼” BSP elbow, ball valve tap & brass 6mm ¼” BSP tail, (3 pieces)

	F-FILTER-DUP2		QTY:
	Fuel filter, inline plastic type.

	EP17		QTY:
	High back rally seat, fibreglass, smooth internal finish with 5 point seatbelt slots, rolled edge, black colour. 500mm wide x 800mm tall x 700 deep overall. Base 450mm deep.

	HAR-5-DUP3		QTY:
	5 Point Race Harness, 3" webbing with Link & Latch buckle. Legal for CAMS racing. Can be used as a 4 point if required. (not required if buying HAR-4).

	ARMRESTRAIN		QTY:
	Arm restraints, designed to stop your arms flying out of the rollbars in the event of a rollover, clips onto harness.

	S-SLIDE		QTY:
	Seat slide kit, laser cut seat slide system welds into chassis, 5 weld in plates, 2 slide plates & adjustment handle, complete with nuts, bolts & return spring.

	BC20		QTY:
	Nose bash plate, 2mm Aluminium sheet

	BC21		QTY:
	Engine Bash plate, 3mm Aluminium sheet

	BC22		QTY:
	Bulkhead plate, 2mm Aluminium sheet

	BATBX01		QTY:
	Battery box, steel with 3mm Aluminium lid, to suit 330 CCA, 35AH small car battery. Internal box dimensions = 255mm tall x 200mm x 135mm.

	BC2K		QTY:
	Nerf bars, pre-bend un-welded kit with 6 laser cut mounts.

	WR4-10		QTY:
	12x6” 4 stud rim, 156mm PCD, steel.

	WR6-01-DUP1		QTY:
	12x10.5” 6 Stud rim, 139.7mm PCD, steel.

	TY12-03		QTY:
	25x8x12” Maxis front tyre

	TY12-02		QTY:
	26x12x12” Bearclaw tyre

See our Conditions of Sale.

Previous Page 1 [2] 3 Next Page

Secure ecommerce shopping cart software
and credit card processing provided by ezimerchant