Current Category : The Barracuda - Go to Category Index | Search.

Instructions: Scroll down the list of parts and find the item or items that you want. For each part enter the quantity that you want and click on the "buy" button displayed for that item. You will then be taken to your current purchase list, and that item should have been added. If you need to order more click back button on your browser and and do the same for each item. However, if at this stage that is all you want to buy click on 'check out'. You will then be asked to fill out your information on a secure server.

All Prices are in Australian Dollars. ( USA residents will only pay approx 75% of list prices quoted due to exchange rates. ) Note: Our Australian dollar is only worth around 75 cents to the US dollar, that means USA residents will only pay around half the price shown here in Australian dollars.

Your Computer: If this page is not working as you think it should please make sure your internet browser has javascript enabled. Our javascript is harmless and enabling javascript can be done for just the time you are at our site if you wish. But generally it is enabled by default. If your not sure how to enbable it please try (in Internet Explorer) going to Tools > Options then the Security Tab where you can set it back to 'Default' or enabling 'Active Scripting'.

	BC1		QTY:
	Chassis, fully welded with rollbars all brackets, including CV1 rear housing welded in. (no seat slides) Chassis frame only.

	BCPAC		QTY:
	Chassis frame pack, Pre-cut base frame, pre-bent tubes, brace tubes &  pre-cut RHS, pre-bent rollbars & all laser cutting, (BCLAZER) None of the tubes are fishmouthed. (no seat slides), (Not required if ordering BC1).

	BCLAZER		QTY:
	Laser cut bracket kit for chassis only, (Not required if ordering BC1 or BCPAC). 79 plates.

	BCPAN		QTY:
	Floor pan, 2mm Aluminium sheet, (can only be ordered if buying BC1 welded chassis)

	BC3		QTY:
	Upper suspension arms, fully welded with inserts welded in, (2).

	BC4		QTY:
	Upper arm machined Inserts, set of 6, 4 x ¾”, 2 x 5/8”, (not required if ordering part BC3)

	BC5		QTY:
	Castor adjuster nuts, (2) fully machined.

	3/4ROD-4		QTY:
	Rod ends ¾” UNF Male RH with ¾” UNF Jam nuts, (4 of each)

	5/8ROD-2		QTY:
	Rod ends 5/8” UNF Male RH with 5/8” UNF Jam nuts, (4 of each) For suspension arms & tie rod ends.

	1/2ROD-2RH		QTY:
	Rod ends ½” UNF Male RH with ½” Jam nuts, (2 of each)

	3/4SPAC		QTY:
	¾” Rod end spacers, machined aluminium, (8).

	5/8SPAC		QTY:
	5/8” Rod end spacers, machined aluminium, (8).

	1/2SPAC		QTY:
	1/2” Rod end spacers, machined steel, (4).

	BC6		QTY:
	Lower suspension arms, fully welded with shock mount plates & lower arm nut housing, (2)

	BC7		QTY:
	Lower arm nut housings, (2) machined from steel, (not required if ordering part BC6)

	BC8		QTY:
	Lower arm adjuster nuts, ¾” UNF threads, machined from 30mm hex bar, (2)

	BSH16-8-DUP2		QTY:
	Lower suspension arm pivot bushes, Acetal, 16mm, (8).

	BC9		QTY:
	Set of 4 pivot bolts, washers & nyloc nuts, M16x100

	BC10		QTY:
	Front suspension uprights, fully welded, (2)

	BC11		QTY:
	Front upright laser cut kit, unwelded, 12 plates, (not required if ordering BC10)

	STUB01		QTY:
	Stub axles, fully machined, with split pins & castle nuts, (2) (not required if ordering BC10).

	BC12		QTY:
	Upright pivot & steering arm bolts, ½”UNF x 3 ¼” with flat washers & nyloc nuts, (6)

	FWH-04		QTY:
	Front Wheel hubs with disc rotor mount, alloy, 4 Stud 156mm PCD, includes studs, nuts, bearings & seals, dust caps. Suits Taipan, Sidewinder, Piranha & Barracuda

	FHUB		QTY:
	Front Wheel hub centres, machined from steel, weld on your own wheel plates, with bearings, seals, dustcaps, 12 studs & nuts. (does not include wheel hub plates).

	CAL032x2		QTY:
	Brake Calipers, matching pair alloy twin piston for front brakes, includes bleed screw & Banjo bolt.

	DBR032		QTY:
	Front Disc Rotors, 180mm dia, 4mm steel slotted, suits FWH-04 Front Wheel Disc Hubs only. Suits Sidewinder, Piranha & Barracuda.

	HSE-BCF		QTY:
	Pair of front brake hoses, from master cylinder to front calipers, stainless braided hose, 2 x 1300mm long.

	BB-03		QTY:
	Double Banjo bolt, M10x1.25, adapts both hoses to master cylinder.

	PEDBOX-2-DUP2		QTY:
	Brake pedal box complete with pedal & 5/8” master cylinder.

	BCBRAKE		QTY:
	Front brake kit, includes BC10 welded uprights, FWH-04 hubs, CAL032x2 Calipers, DBR032 Rotors, HSE-06 Hoses, BB-03 Double banjo bolt, PEDBOX-2.

	PEDBOX-3		QTY:
	Throttle pedal box complete with pedal.

	PEDBOX-DUP1		QTY:
	Pedal box housing used to mount pedal & master cylinder or throttle pedal, (not required if ordering PEDBOX-2 or PEDBOX-3).

	PEDAL-DUP2		QTY:
	Pedal, laser cut racing design with Acetal pivot bushes. Fits Pedal box, not required if ordering PEDBOX-2 or 3

	MSC-01-DUP7		QTY:
	Master cylinder, 5/8” Girling type, fits pedal box, with M10 x 1.25 banjo bolt & crush washers.

	PSHROD-DUP1		QTY:
	Pushrod & clevis for master cylinder

	RACK		QTY:
	Performance XRV Rack & Pinion, with adjustable gear mesh. Comes with 4 x M8x40 capscrews & nuts.

See our Conditions of Sale.

[1] 2 3 Next Page

Secure ecommerce shopping cart software
and credit card processing provided by ezimerchant