Current Category : Double A Arm Suspension - Go to Category Index | Search.

Instructions: Scroll down the list of parts and find the item or items that you want. For each part enter the quantity that you want and click on the "buy" button displayed for that item. You will then be taken to your current purchase list, and that item should have been added. If you need to order more click back button on your browser and and do the same for each item. However, if at this stage that is all you want to buy click on 'check out'. You will then be asked to fill out your information on a secure server.

All Prices are in Australian Dollars. ( USA residents will only pay approx 75% of list prices quoted due to exchange rates. ) Note: Our Australian dollar is only worth around 75 cents to the US dollar, that means USA residents will only pay around half the price shown here in Australian dollars.

Your Computer: If this page is not working as you think it should please make sure your internet browser has javascript enabled. Our javascript is harmless and enabling javascript can be done for just the time you are at our site if you wish. But generally it is enabled by default. If your not sure how to enbable it please try (in Internet Explorer) going to Tools > Options then the Security Tab where you can set it back to 'Default' or enabling 'Active Scripting'.

	DA01		QTY:
	Laser cut plates for Double A arm Rear end housing, 2 x Side plates, 1 x Rear pivot plate, 1 x Front pivot plate, 1 x Top plate. Just needs welding.

	PIR03		QTY:
	Laser cut Adjuster plates. 2 x Adjuster plates, 2 x Adjuster backing plates

	PIR04 -DUP1		QTY:
	Bearings for centre shaft & axles, 1 3/8”, 6 bearings.

	PIR05		QTY:
	Bearing clamp flanges to suit bearings for centre shaft & axles, 6 pair, (12).

	PIR06		QTY:
	Centre shaft , 1 3/8” six spline, 306mm long with machined grooves.

	PIR07		QTY:
	Drive Hub, 1 3/8” six spline bore with 4 bolt flange. (suits SPR530-50 & DBR04) 2 req’d

	DBR-05		QTY:
	Rear Disc rotor. 280mm Dia, 4mm thick, Flaming disc design with 4 hole mount. Suits PIR07 drive hub

	SPR530-50-DUP2		QTY:
	Rear Sprocket, 50 tooth, 530 pitch, Suits Piranha PIR07 drive hub or Sidewinder MHU-01,  (use either 50, 51, 55 or 60 tooth sprocket).

	SPR530-60		QTY:
	Rear Sprocket, 60 tooth, 530 pitch, Suits Piranha PIR07 drive hub. (use either 50, 55 or 60 tooth sprocket).

	CAL032-DUP3		QTY:
	Brake Caliper, alloy twin piston for rear brakes, includes bleed screw & Banjo bolt.

	DA02		QTY:
	Rear Caliper mount. Bolts between CAL032 caliper & Bearing adjuster. Suits CAL032 Caliper only.

	DA03		QTY:
	Rear suspension arms, top & bottom, right & left, fully welded. Set of 4.

	DA04		QTY:
	Rear suspension uprights, set of laser cut plates, Unwelded, set of 8 plates, lightweight design.

	IND-07-DUP1		QTY:
	Rear axles, (2) Splined shafts with wheel hubs, studs & nuts.

	PIR16		QTY:
	Laser cut Rear wheel plates with splined bore. Includes 2 x wheel hubs, 4 x 8mm Stiffner plates.

	BSH16-8-DUP3		QTY:
	Suspension arm pivot bushes, Acetal, (8)

	BSH12-8		QTY:
	Suspension upright pivot bushes, Acetal, (8)

	DA05		QTY:
	Rear suspension arm pivot bolts, 16mm x 381mm long.

	DA06		QTY:
	Suspension upright pivot bolts, M12 x 90, includes Nyloc nuts & washers, set of 4.

	DA07		QTY:
	Shock mount spacers, set of 8.

	PIR12		QTY:

	PIR18		QTY:
	Complete Double “A” arm rear end kitset, includes all the above parts, Centre housing & uprights not welded. Suspension arms fully welded. All nuts & bolts.

	HSE-04-DUP2		QTY:
	Rear brake hose, Earls stainless steel braided with Banjo fitting each end. 2.4 Metres long

	BB-01-DUP3		QTY:
	Banjo Bolt with crush washers, used to connect brake hose to caliper & brake hose to master cylinder M10x 1.25.

	CH530-114-DUP2		QTY:
	Drive Chain, 530 pitch, Heavy duty, 114 links with connector link.

	032 PAD		QTY:
	Spare brake pads to suit The Edge Products CAL032 Caliper, EBC Brand, Kevlar

See our Conditions of Sale.

Secure ecommerce shopping cart software
and credit card processing provided by ezimerchant