Current Category : The Raven - Go to Category Index | Search.

From this page you can securely order parts for the Raven. You may cick here for comprehensive information on the Raven or click here to go to the plans ordering page.

Instructions: Scroll down the list of parts and find the item or items that you want. For each part enter the quantity that you want and click on the "buy" button displayed for that item. You will then be taken to your current purchase list, and that item should have been added. If you need to order more click back button on your browser and and do the same for each item. However, if at this stage that is all you want to buy click on 'check out'. You will then be asked to fill out your information on a secure server.

All Prices are in Australian Dollars. ( USA residents will only pay approx 75% of list prices quoted due to exchange rates. ) Note: Our Australian dollar is only worth around 75 cents to the US dollar, that means USA residents will only pay around half the price shown here in Australian dollars.

Your Computer: If this page is not working as you think it should please make sure your internet browser has javascript enabled. Our javascript is harmless and enabling javascript can be done for just the time you are at our site if you wish. But generally it is enabled by default. If your not sure how to enbable it please try (in Internet Explorer) going to Tools > Options then the Security Tab where you can set it back to 'Default' or enabling 'Active Scripting'.

	RAV01		QTY:
	Chassis Frame, fullly welded with holes drilled. Includes engine mount plate and axle beam welded on

	RAV02		QTY:
	Floor Pan (can only be ordered if ordering RAV01 Chassis)

	RAV03		QTY:
	Chassis Frame Pack, pre-cut & drilled ready for welding (no front axle beam) (not needed if ordering RAV01 Chassis)

	RAV04		QTY:
	Front Axle Beam, fully welded with holes drilled (not needed if ordering RAVO1 chassis)

	RAV05		QTY:
	Front Stub Axles, fully welded with uprights, steering arms, washers & split pins

	BSH12-4-DUP2		QTY:
	4 Stub Axle Bushes (acetal)

	STB12-2-DUP2		QTY:
	Stub Axle bolts, 12mm. Includes washers & nyloc nuts

	RAV06		QTY:
	Steering Shaft, drilled with Steering Boss welded on

	RAV07		QTY:
	Steering Shaft Lock Collar, drilled & tapped with grub screw

	SB01-DUP1		QTY:
	Steering Boss Flange only (not needed if ordering RAV06 Steering Shaft)

	RAV08		QTY:
	Bellcrank, welded & drilled, comes with 6mm rollpin

	RAV09		QTY:
	Steering Tie Rods, twisted & drilled

	RAV10		QTY:
	3 Steering Bushes (acetal) supports Steering Shaft

	RAV11		QTY:
	Steering Upright, fully welded & drilled

	RAV12		QTY:
	Steering Kit, includes: RAV05, BSH12-4, STB12-2, RAV06, RAV07, RAV08, RAV09, RAV10, RAV11 (Discounted price)

	STW-01-DUP6		QTY:
	Steering Wheel, nylon go-kart 3-Spoke 11" Æ (Black)

	RAV13		QTY:
	Pedals: Throttle & Brake, fully welded & drilled

	RAV14		QTY:
	Rear Axle, fully welded & drilled with mount plates

	RAV15		QTY:
	Brake Link Rod, drilled

	RAV16		QTY:
	Brake Bar, fully welded & drilled, includes Brake Paddle & Lock Collar

	RAV17		QTY:
	Brake Bar Pivots, welded & drilled, includes 2x16mm acetal bushes

	RAV18		QTY:
	Brake Kit, includes: RAV15, RAV16, RAV17 (Discounted price)

	RAV19		QTY:
	Seat Frame, fully welded & drilled, includes 2 x seat clamps

	SEAT1		QTY:
	Fibreglass Racing Go-kart Seat

	RAV20		QTY:
	Pair of complete Front Wheels, 16x4x8, includes Steel Rims, 1" Bearings & Tyres

	RAV21		QTY:
	Pair of complete Rear Wheels, 16x6.5x8, includes Steel Rims, 1" Bearings & Tyres (one rim is fitted with sprocket mount)

	SPR-03		QTY:
	82 tooth Sprocket, 35-1 3/8 pitch steel, bolts onto rear wheel rim, includes stand-off spacers & bolts.

	CLUTCH 3/4"		QTY:
	Max Torque Centrifugal Clutch, 3/4" bore with 12 tooth 35-1 3/8" pitch sprocket

	CH351-100		QTY:
	Drive Chain, 35-1 3/8" pitch, 100 links with connector link

	RAV24		QTY:
	Drive Kit, includes: Clutch 3/4", Drive Chain & 82 tooth Sprocket with spacers

	RAV22		QTY:
	Engine Mount Plate, suits 3.5hp Briggs & Stratton motor (not needed if ordering RAV01 Chassis) Also suits 5.5hp motor.

	RAV23		QTY:
	Throttle Cable, to suit 3.5hp Briggs & Stratton motor

	BRIGGS 3.5		QTY:
	Briggs & Stratton industrial plus 3.5hp Motor, manual start, 3/4" Crank, horizontal shaft

	RAV25		QTY:
	Chain Guard, bolts onto 3.5hp Briggs & Stratton motor & covers clutch & chain

	RAV26		QTY:
	Complete Disassembled Raven Kit, includes: all components including Chassis, Axles, Wheels, Motor & Drive, nuts & bolts. Just needs painting & assembly

See our Conditions of Sale.

Secure ecommerce shopping cart software
and credit card processing provided by ezimerchant