Current Category : The Piranha > Rear Suspension Module Components - Go to Category Index | Search.

From this page you can securely order parts for the Piranha. You may cick here for comprehensive information on the Piranha or click here to go to the plans ordering page.

Instructions: Scroll down the list of parts and find the item or items that you want. For each part enter the quantity that you want and click on the "buy" button displayed for that item. You will then be taken to your current purchase list, and that item should have been added. If you need to order more click back button on your browser and and do the same for each item. However, if at this stage that is all you want to buy click on 'check out'. You will then be asked to fill out your information on a secure server.

All Prices are in Australian Dollars. ( USA residents will only pay approx 75% of list prices quoted due to exchange rates. ) Note: Our Australian dollar is only worth around 75 cents to the US dollar, that means USA residents will only pay around half the price shown here in Australian dollars.

Your Computer: If this page is not working as you think it should please make sure your internet browser has javascript enabled. Our javascript is harmless and enabling javascript can be done for just the time you are at our site if you wish. But generally it is enabled by default. If your not sure how to enbable it please try (in Internet Explorer) going to Tools > Options then the Security Tab where you can set it back to 'Default' or enabling 'Active Scripting'.

	PIR02		QTY:
	Laser cut plates for Rear end housing, 4 plates, sides front & back. Just needs welding.

	PIR22		QTY:
	Laser cut Adjuster plates. 2 x Adjuster plates, 2 x Adjuster backing plates, caliper spacer. Nuts & bolts to mount caliper. One plate incorporates caliper mount for 032 caliper

	PIR04		QTY:
	Bearings for centre shaft & axles, 1 3/8”, 6 bearings.

	PIR05-DUP1		QTY:
	Bearing clamp flanges to suit bearings for centre shaft & axles, 6 pair, (12)

	PIR06-DUP1		QTY:
	Centre shaft , 1 3/8” six spline, 306mm long

	PIR07-DUP1		QTY:
	Drive Hub, 1 3/8” six spline bore with 4 bolt flange. (suits SPR530-50/55/60 & DBR04) 2 req’d

	DBR-04		QTY:
	Rear Disc rotor. 280mm Dia, 5mm thick, slotted with 4 hole mount. Suits PIR07 drive hub

	SPR530-50-DUP3		QTY:
	Rear Sprocket, 50 tooth, 530 pitch, Suits Piranha PIR07 drive hub or Sidewinder MHU-01,  (use either 50, 51, 55 or 60 tooth sprocket).

	SPR530-55		QTY:
	Rear Sprocket, 55 tooth, 530 pitch, Suits Piranha PIR07 drive hub or Sidewinder MHU-01 (use either 50, 51, 55 or 60 tooth sprocket).

	SPR530-60-DUP1		QTY:
	Rear Sprocket, 60 tooth, 530 pitch, Suits Piranha PIR07 drive hub. (use either 50, 55 or 60 tooth sprocket).

	CAL032		QTY:
	Brake Caliper, alloy twin piston for rear brakes, includes bleed screw & Banjo bolt.

	PIR09		QTY:
	Rear suspension arms, right & left, fully welded

	PIR10		QTY:
	Laser cut plates for Rear suspension arms, Includes 2 x Inner plates, 2 x Outer plates, 4 x Shock upright plates, 2 x Rear arm stiffners. Not required if ordering PIR09.

	IND-08-DUP1		QTY:
	Rear axles, (2) Splined shafts with 4 stud wheel hubs, 115mm PCD, includes studs & nuts

	PIR23		QTY:
	Laser cut Rear wheel plates, 4 stud 115mm PCD with splined bore. Includes 2 x wheel hubs, 4 x 8mm thick Stiffner plates. Not required if ordering IND-08.

	BSH16-8-DUP1		QTY:
	Suspension arm pivot bushes, Acetal, (8)

	PIR11		QTY:
	Rear suspension arm pivot bolts, M16 with nuts & washers

	PIR12-DUP1		QTY:
	Rear Drive Shafts, Uni Joint type, Fit between Centre shaft & Axles. Left & right side. No.4.

	PIR17		QTY:
	Complete rear end kitset. Hub to Hub.

	CH530-114		QTY:
	Drive Chain, 530 pitch, Heavy duty racing motorcycle O-ring chain, 114 links with connector, 7500 psi tensile rating.

	HSE-04		QTY:
	Rear brake hose, stainless steel braided with Banjo fitting each end. 2.4 metres long.

See our Conditions of Sale.

Secure ecommerce shopping cart software
and credit card processing provided by ezimerchant