The Double "A" arm rear
suspension.
Turn your flesh hungry Piranha into a rabid beast !!
Features:
The Double "A" arm rear suspension has been designed as an
optional rear suspension to suit the Piranha series II. This is now available in plans, parts & kitsets.
Printable information sheet:
 To Download a PDF copy to your
PC: Right-mouse click on the PDF image and select "Save Link (Target) As...".
To open PDF files you require at least Adobe Acrobat Reader, available as a free download from
http://www.adobe.com/.
If you don't wish to download this please just use the information below, it
is the same information as in the download.
Examples on a customer buggy:
This new rear end fits into exactly the same position as the
Piranha series II single arm rear suspension, all bar work remains the same.
The Double "A" Arm rear has the following advantages over the
standard Piranha single arm rear suspension.
 More control
over full suspension Camber
Stronger design spreading
loads over a larger area.
More resistance to
acceleration torque reaction effects.
Increased droop available
without going into positive camber.
More suspension travel.
Better resistance to frontal
wheel forces from severe bumps.
Increased braking capacity.
The construction features common length "A" arms, all arms can
be made out of one common jig.
The suspension geometry features progressive negative camber which equals
precise stability in severe offroad conditions.
Designed to suit the Piranha series II buggy, but also a
valuable component for any home built offroad buggy.
The plans include detail 3D drawings of all the parts that need
to be made, rear housing, uprights, driveshafts, drive hubs, wheel hubs, axles,
chain adjusters, disc rotor, caliper mount, bushes, pivot pins & many detail
assembly & exploded views.
Without doubt the most comprehensive detailed plans available.
NOTE: The Double "A" arm suspension plans cover the complete
rear suspension only, not the chassis or other buggy parts.
If building a Piranha series II with this suspension both sets
of plans are required.
The plan for this suspension can be securely order from here.
PLAN SET $55.00 Australian Dollars.
Pricing includes air mail postage anywhere in the world via International Express Post.
( USA residents will only pay approx 75% of list prices
quoted due to exchange
rates. )
SPECIFICATIONS:
Plans: Comprehensive Plans, over
50 pages of 3D CAD drawings in book format.
Suspension Rear: Double 'A' arm
independent with coil over shocks, 300mm travel, (12")
Track: 1430mm (rear) (56.3")
Droop: Approx 40mm, (1.5")
Camber: 1 degree negative at ride
height & 12 degrees negative at full travel.
Ground Clearance: Adjustable to
310mm, (12.25")
Suitable engines: Designed to Suit
chain drive type motorcycle engines up to 1000cc.
DOUBLE "A" ARM REAR SUSPENSION PARTS
LIST
These parts can be securely ordered from
here.
COMPLETE KITSETS LISTED IN RED
|
PART No. |
QTY |
DESCRIPTION |
GST
EXEMPT |
RETAIL PRICE |
| DA01 |
KIT |
Laser cut plates for Double
A arm Rear end housing, 2 x Side plates, 1 x Rear pivot plate, 1 x Front
pivot plate, 1 x Top plate. Just needs welding. |
$131.82 |
$145.00 |
|
PIR03 |
KIT |
Laser cut Adjuster plates.
2 x Adjuster plates, 2 x Adjuster backing plates. |
$59.10 |
$65.00 |
| PIR04 |
Set 6 |
Bearings for centre shaft
& axles, 1 3/8”, 6 bearings. |
$141.82 |
$156.00 |
|
PIR05 |
Set 12 |
Bearing clamp flanges to
suit bearings for centre shaft & axles, 6 pair, (12). |
$60.00 |
$66.00 |
|
PIR06 |
Each |
Centre shaft , 1 3/8” six
spline, 306mm long with machined grooves. |
$54.55 |
$60.00 |
|
PIR07 |
Each |
Drive Hub, 1 3/8” six spline
bore with 4 bolt flange. (suits SPR530-50 & DBR04) 2 req’d |
$68.19 |
$75.00 |
|
DBR-05 |
Each |
Rear Disc rotor. 280mm Dia,
4mm thick, Flaming disc design with 4 hole mount. Suits PIR07 drive hub |
$68.19 |
$75.00 |
|
SPR530-50 |
Each |
Rear Sprocket, 50 tooth,
530 pitch, Suits PIR07 drive hub. |
$65.46 |
$72.00 |
|
SPR530-60 |
Each |
Rear sprocket, 60 tooth,
530 pitch, suits PIR07 drive hub. (use either 50 or 60 tooth sprocket). |
$65.46 |
$72.00 |
|
CAL032 |
Each |
Brake caliper, twin piston
with performance EBC Kevlar pads, includes bleed screw & Banjo bolt. |
$140.91 |
$155.00 |
|
DA02 |
Each |
Rear Caliper mount. Bolts
between CAL032 caliper & Bearing adjuster. Suits CAL032 Caliper only. |
$20.00 |
$22.00 |
|
DA03 |
Set 4 |
Rear suspension arms, top
& bottom, right & left, fully welded. Set of 4. |
$281.82 |
$310.00 |
|
DA04 |
Set |
Rear suspension uprights, set of laser cut plates, Unwelded, set of 8 plates, lightweight design. |
$87.28 |
$96.00 |
|
IND-07 |
Pair |
Rear axles, (2) Splined shafts
with wheel hubs, studs & nuts. |
$168.19 |
$195.00 |
|
PIR16 |
Set 6 |
Laser cut Rear wheel plates
with splined bore. Includes 2 x wheel hubs, 4 x 8mm Stiffner plates. |
$56.37 |
$62.00 |
|
BSH16-8 |
Set 8 |
Suspension arm pivot bushes,
Acetal, (8) |
$50.92 |
$56.00 |
|
BSH12-8 |
Set 8 |
Suspension upright pivot
bushes, Acetal, (8) |
$36.37 |
$40.00 |
|
DA05 |
Set 4 |
Rear suspension arm pivot
bolts, 16mm x 381mm long,(4). |
$48.19 |
$53.00 |
|
DA06 |
Set 4 |
Suspension upright pivot
bolts, M12 x 90, includes Nyloc nuts & washers, set of 4. |
$6.37 |
$7.00 |
|
DA07 |
Set 8 |
Shock mount spacers, set
of 8. |
$20.91 |
$23.00 |
|
PIR12 |
KIT |
Rear Drive Shafts, Uni Joint
type, Fit between Centre shaft & Axles. Left & right side. |
$431.82 |
$475.00 |
|
PIR18 |
KIT |
Complete Double “A” arm rear
end kitset, includes all the above parts, Centre housing & uprights
not welded. Suspension arms fully welded. All nuts & bolts. |
$2090.91 |
$2300.00 |
|
HSE-04 |
Each |
Rear brake hose, Earls stainless
steel braided with Banjo fitting each end. 2.4 Metres long |
$82.73 |
$91.00 |
|
CH530-114 |
Each |
Drive Chain, 530 pitch, Heavy
duty, 114 links with connector link. |
$50.91 |
$56.00 |
|
032 PAD |
Pair |
Spare brake pads to suit
The Edge Products CAL032 Caliper, EBC Brand, Kevlar. |
$29.10 |
$32.00 |
|
BB-01 |
Each |
Banjo Bolt & crush washers.
Used to connect brake hose to Master cylinder. 1 req’d |
$6.37 |
$7.00 |
NOTE: ALL ABOVE RETAIL PRICES INCLUDE GST. GST EXEMPT PRICES
FOR EXPORT ONLY.
All the above parts can be securely ordered from here.
All Prices In Australian Dollars.
( USA residents will only pay approx 75% of list prices quoted due to exchange
rates. )
Contact us for a quote on freight charges to your area, we freight Australia wide daily.
|
