THE BUGGY TRAILER INTRODUCTION

The Edge Products have produced this set of plans so you can make your own buggy trailer.

Designed to suit small to mid size buggies up to 450 kg this trailer is very simple to build & very economical on the pocket.

Made out of easy to find steel materials & off the shelf trailer components The Buggy Trailer is a simple task to construct for the novice welder.

The Buggy Trailer plans have over 22 pages of detailed 3D CAD drawings as well as 30 pages of ADR, ( Australian design rules ) for small trailers.

THIS TRAILER IS SUITED TO ALL OF THE EDGE PRODUCTS BUGGY DESIGNS

The plan for this trailer can be securely order from here. PLAN SET $38.00 Australian Dollars.
Pricing includes air mail postage anywhere in the world via International Express Post.
( USA residents will only pay approx 75% of list prices quoted due to exchange rates. )
 

SPECIFICATIONS:

LENGTH OVERALL - 3856mm
WIDTH OVERALL - 2380mm
OVERALL HEIGHT - 777mm

HEIGHT (raised ramps) - 1678mm
RAMP LENGTH - 1190mm
RAMP ANGLE - 22 degrees
DECK HEIGHT - 487mm
HITCH HEIGHT - 520mm
TRAILER WEIGHT - 250 kg approx

WHEEL SIZE - 205/70/14
SPRINGS - 4 leaf 540 kg
SUSPENSION - leaf springs, beam axle

CARRYING CAPACITY:
LENGTH OF LOAD - 2575mm
WIDTH OF LOAD - 1870mm
APPROX MAX LOAD - 450 kg
 

NOTE: Registration of vehicles remains the responsibility of the States & Territories. Trailer manufactures should consult the registration authority where the trailer will be registered, for registration procedures, such as inspection, specification and the states safety requirements. The EDGE Products will not be held responsible for the suitability of this trailer as to the use the owner intends subject to the laws & regulations of that state or territory.