Bearing 115x75x20

60152RS, Bearing 115x75x20, (1 only)

---

Front brake upgrade

Front Brake upgrade for Barracuda when fitting 15” wheels. Right & left sides. Uprights are of a new design that has increased kingpin inclination to compensate for the heavier steering induced by 15” wheels. Bigger floating rotors & Wilwood calipers. Awesome braking power. NOTE: ¾” master cylinder is required. Kit Includes: 2 x FWH-04 alloy hubs, 2 x Stub axles, 2 x Wilwood calipers, 2 x 312mm diameter 6mm thick floating rotors, Bearings & seals, studs & nuts.

---

Sprocket kit

Upgraded rear drive sprocket for PIRCV rear end, includes 8mm thick, steel 60 tooth 530 pitch sprocket, drive flange that fits over CV3 drive hub, 12 x M10 mounting screws, 6 x M10 Nyloc nuts, 6 x 4mm Rollpins. The flange bolts to the inside of the sprocket & uses the CV3 drive hub as a spline drive. The rollpins stop the original 6 drive screws un-winding. (all Edge CVCARTS have this kit as standard).

---

Replacement Driveshaft Boots for PIR12

Replacement boots for PIR12 driveshafts.

---

Front Brake Kit

All the above parts to set up Front Brakes, including FWH-04 hubs, DBR032 rotors, CAL032 calipers, BB-01 banjo bolts, STUB032 stub axles, HSE-03 front brake hoses, BB-03 double banjo bolt, PEDBOX-2 brake pedal box, all nuts & bolts. For front left & right hand wheels. Suits Sidewinder & Piranha