Complete Uprights (Fully Welded)

Complete welded uprights with bearing housings, (2) (not required if ordering CV16, CV17, CV18.

---

Front brake upgrade

Front Brake upgrade for Barracuda when fitting 15” wheels. Right & left sides. Uprights are of a new design that has increased kingpin inclination to compensate for the heavier steering induced by 15” wheels. Bigger floating rotors & Wilwood calipers. Awesome braking power. NOTE: ¾” master cylinder is required. Kit Includes: 2 x FWH-04 alloy hubs, 2 x Stub axles, 2 x Wilwood calipers, 2 x 312mm diameter 6mm thick floating rotors, Bearings & seals, studs & nuts.

---

Heavy Duty 930 CV joint boots

930 CV Over-boot, (set of 4) suits all 930 CV joints, These are the toughest 930 CV boots made. Designed by Edge & made of tough durable rubber. 4mm wall thickness & 5mm thickness at each end. 168mm overall length. Designed to fit a 25mm, (1”) axle & fit over the top of the CV joint. No mounting flanges required. (90-110mm hose clamp required to fit) (Will fit Edge manufactured PIRCV components from August 08’ onwards).

---

Tie Rods (2)

Tie rods to suit XRV rack & pinion, (2).

---

Wheel nut for BTR rims

Wheel nuts to suit 15" BTR rims. BTR rims have a VW style radius instead of a 60 degree taper for the wheel nut. Edge have custom made these nuts to suit the BTR rims. These nuts have the correct radius, 7/16" UNF thread to suit a standard wheel stud, 7/8" Hex, 35mm long with a domed head. (sold individually).