530 Pitch Drive Chain

Drive Chain, 530 pitch, Heavy duty motorcycle O-ring chain, 114 links with connector, 7500 psi tensile rating.

---

40mm Brass Core Plugs

Brass 40mm core plugs, used for blanking off CV hub centre hole.

---

Front brake upgrade

Front Brake upgrade for Barracuda when fitting 15” wheels. Right & left sides. Uprights are of a new design that has increased kingpin inclination to compensate for the heavier steering induced by 15” wheels. Bigger floating rotors & Wilwood calipers. Awesome braking power. NOTE: ¾” master cylinder is required. Kit Includes: 2 x FWH-04 alloy hubs, 2 x Stub axles, 2 x Wilwood calipers, 2 x 312mm diameter 6mm thick floating rotors, Bearings & seals, studs & nuts.

---

Heavy Duty 930 CV joint boots

930 CV Over-boot, (set of 4) suits all 930 CV joints, These are the toughest 930 CV boots made. Designed by Edge & made of tough durable rubber. 4mm wall thickness & 5mm thickness at each end. 168mm overall length. Designed to fit a 25mm, (1”) axle & fit over the top of the CV joint. No mounting flanges required. (90-110mm hose clamp required to fit) (Will fit Edge manufactured PIRCV components from August 08’ onwards).

---

Castor Adjuster Nuts (2)

Castor adjuster nuts, (2) fully machined.