Email:
Password:  
Trax II General Components
 

Trax II General Components
NOTE: Prices show include 10% GST, which only applies to Australian customers. USA residents will only pay approx 107% of list prices quoted due to EXCHANGE rates. Click here to check the value in your local currency.

View Product Details 		Accelerator Pedal Spring AUD$4.00
 
Accelerator pedal spring, used on all Edge buggies.
PART NUMBER:ACCEL SPRING
Qty:

View Product Details 		Arm Restraints AUD$57.00
 
ARM RESTRAINTS, designed to stop your arms flying
PART NUMBER:ARM RESTRAIN
Qty:

View Product Details 		Banjo Bolt AUD$7.00
 
Banjo Bolt with crush washers, M10x1.25, used to connect brake hose to master cylinder, another used to connect brake hose to Caliper.
PART NUMBER:BB-01
Qty:

View Product Details 		Brake Caliper (Twin Piston) AUD$135.00
 
Brake Caliper, alloy twin piston for rear brakes,
PART NUMBER:CAL032
Qty:

View Product Details 		35-1 3/8" Pitch Drive Chain AUD$26.00
 
Drive Chain, 35-1 3/8" pitch, 100 links with conne
PART NUMBER:CH351-100
Qty:

View Product Details 		Disc Brake Rotor (4mm/240mm) AUD$55.00
 
Disc Brake Rotor, steel, 240 dia , 4mm thick, slotted, suits MHU-01 Drive Hub, suits most motorcycle motors
PART NUMBER:DBR-02
Qty:

View Product Details 		Floor Pan AUD$45.00
 
Floor Pan, 2mm sheet, 830 x 550mm (can only be ordered if ordering FT01 Chassis)
PART NUMBER:FLPN-01
Qty:

View Product Details 		Chassis Frame (Fully Welded) AUD$285.01
 
Lower Chassis Frame only, fully welded with holes drilled, mount brackets and axle beam welded on, does not include rollbars.
PART NUMBER:FT01
Qty:

View Product Details 		Chassis Frame (Unwelded) AUD$115.01
 
Chassis Frame Pack, pre-cut & drilled ready for welding (no front axle beam) (not needed if ordering FT01)
PART NUMBER:FT02
Qty:

View Product Details 		Front Axle Beam AUD$60.01
 
Front Axle Beam, fully welded with holes drilled
PART NUMBER:FT03
Qty:

View Product Details 		Lock Collars AUD$14.00
 
Lock Collars, drilled & tapped with grub screw
PART NUMBER:FT10
Qty:

View Product Details 		Stub Axles AUD$82.00
 
Stub Axles, fully welded with uprights, steering arms, nuts, washers, & split pins
PART NUMBER:FT12
Qty:

View Product Details 		Master Cylinder Mount Bracket AUD$18.81
 
Master Cylinder mount bracket, fully welded & drilled
PART NUMBER:FT14
Qty:

View Product Details 		Master Cylinder Pushrod and Clevis Joint AUD$13.00
 
Master Cylinder Pushrod & Clevis Joint
PART NUMBER:FT15
Qty:

View Product Details 		Brake Hose (with Banjo Bolts) AUD$85.01
 
Brake Hose, stainless braided with banjo ends, 2 x banjo bolts & crush washers. 1760mm long
PART NUMBER:FT16
Qty:

View Product Details 		Brake Kit AUD$240.01
 
Brake Kit: includes Master Cylinder, brake hose & caliper. Parts:MSC-01, FT16 & CAL-032
PART NUMBER:FT17
Qty:

View Product Details 		Pedals AUD$28.01
 
Pedals, fully welded & drilled
PART NUMBER:FT19
Qty:

View Product Details 		Throttle Cable (to suit Vanguard Motor) AUD$28.00
 
Throttle Cable, to suit 6.0 Vanguard motor
PART NUMBER:FT20
Qty:

View Product Details 		Rear Axle (1000mm) AUD$245.00
 
Rear Axle, 1000mm long, 1 ¼ dia complete with keyways & wheel hubs fitted. comes with Mini, (101.6mm) four stud pattern. Please advise if you require a different stud pattern
PART NUMBER:FT21
Qty:

View Product Details 		Key Steel (10x10mm AUD$15.00
 
Key steel 10x10mm: 1x 50mm long : 1x 173mm long
PART NUMBER:FT22
Qty:

View Product Details 		Seat Frame AUD$22.33
 
Seat Frame, fully welded and drilled
PART NUMBER:FT23
Qty:

View Product Details 		Front Wheel Hubs (4 Stud Mini Pattern) AUD$65.01
 
Front wheel hubs (steel) 4 stud mini pattern with studs, nuts, bearings, seals & dust caps
PART NUMBER:FWH-03
Qty:

View Product Details 		4 Point Race Harness(CAMS Approved) AUD$192.01
 
4 point Race Harness, CAMS approved, 50mm wide strapping
PART NUMBER:HAR-4
Qty:

View Product Details 		Drive Hub AUD$79.00
 
Drive Hub, Billet solid steel 1 ¼" Bore, 4 x 10mm holes on 4" (101.6) PCD. (Suits Disc Rotor & Drive Sprocket)
PART NUMBER:MHU-01
Qty:

View Product Details 		Master Cylinder (5/8") AUD$56.00
 
Master Cylinder 5/8" girling type
PART NUMBER:MSC-01
Qty:

View Product Details 		Rear Axle Bearing Housings (Pair) AUD$27.01
 
Rear Axle Bearing housings, 1 pair
PART NUMBER:P206
Qty:

View Product Details 		Rear Wheel Hubs AUD$132.00
 
Rear wheel hubs only, Machined from solid 1045 bar, 1 1/4” bore, 4 stud 101.6mm PCD with studs & nuts. Please advise if you require a different stud pattern. (hubs not required if ordering rear axle).
PART NUMBER:RWH-02
Qty:

Rear Wheel hubs blank AUD$115.00
 
Wheel hub, Blank no holes, 1 1/4", (31.75mm) bore, 137mm outside diameter, 63mm location diameter, 8mm thick flange. Machined from 1045 Billet steel. No stud pattern drilled so you can drill to your own wheel pattern. Pair, (2).
PART NUMBER:RWH-BLANK
Qty:

View Product Details 		Fibreglass Racing Go-Kart Seat AUD$135.00
 
Fibreglass Racing Go-kart Seat
PART NUMBER:SEAT1
Qty:

View Product Details 		Rear Drive Sprocket (82 tooth,35-1,38") AUD$45.00
 
Rear Drive Sprocket 82 tooth, 35-1, 3/8" pitch steel (suits mount hub: MHU-01)
PART NUMBER:SPR-01
Qty:

View Product Details 		Stub Axle Bolts AUD$18.00
 
2 Stub Axle bolts, 12mm. Includes washers & nyloc nuts
PART NUMBER:STB12-2
Qty:

View Product Details 		Comet TAV2 Torque Converter AUD$280.00
 
TAV2 style Torque Converter, ¾" bore, 12 tooth 35-1, (3/8" pitch) sprocket, comes as a complete bolt on kit.
PART NUMBER:TAV2
Qty:

View Product Details 		Caliper Mount Bracket AUD$28.00
 
Brake calliper mount bracket, suits CAL032 caliper
PART NUMBER:TX032
Qty:

View Product Details 		Harness Mount Plates AUD$12.00
 
Harness mount plates
PART NUMBER:TX-05
Qty:

View Product Details 		Front and Rear Rollbar Tubes AUD$235.00
 
Front and rear Rollbar tubes unwelded, complete set prebent. Need to be trimmed to lenght (not required if ordering TX-02 or TX-03).
PART NUMBER:TX-07
Qty:

View Product Details 		Trax II Complete Chassis Frame (Fully Welded) AUD$615.00
 
Fully welded Trax II Chasis frame, Front and rear rollbars & side intrusion bars & chassis base frame. All welded as one structure.
PART NUMBER:TX-08
Qty:

View Product Details 		Rear Axle Bearings AUD$40.00
 
Rear Axle Bearings 1 ¼", 1 pair
PART NUMBER:UC206
Qty:

View Product Details 		6.00hp Briggs and Stratton Vanguard (Manual Start) AUD$610.00
 
Briggs & Stratton Vanguard 6.0hp Motor, manual start, ¾" crank, horizontal shaft
PART NUMBER:VAN6.0M
Qty: