Email:
Password:  
Sidewinder Front Suspension
 

Sidewinder Front Suspension
NOTE: Prices show include 10% GST, which only applies to Australian customers. USA residents will only pay approx 107% of list prices quoted due to EXCHANGE rates. Click here to check the value in your local currency.

View Product Details 		Banjo Bolt AUD$7.00
 
Banjo Bolt with crush washers, M10x1.25, used to connect brake hose to master cylinder, another used to connect brake hose to Caliper.
PART NUMBER:BB-01
Qty:

View Product Details 		Double Banjo Bolt AUD$9.00
 
Double Banjo bolt, M10x1.25, adapts two front brake hoses to master cylinder. Comes with three crush washers.
PART NUMBER:BB-03
Qty:

View Product Details 		Front Brake Kit AUD$635.00 (save $115.00)
 6 days left!
All the above parts to set up Front Brakes, including FWH-04 hubs, DBR032 rotors, CAL032 calipers, BB-01 banjo bolts, STUB032 stub axles, HSE-03 front brake hoses, BB-03 double banjo bolt, PEDBOX-2 brake pedal box, all nuts & bolts. For front left & right hand wheels. Suits Sidewinder & Piranha
PART NUMBER:BRAKE KIT
Qty:

View Product Details 		Stub Axle Bushes (4) AUD$23.00
 
4 x Stub Axle Bushes (acetal)fit into ends of stub axle pivot tube. (set of 4).
PART NUMBER:BSH12-4
Qty:

View Product Details 		Brake Caliper (Twin Piston) (Pair) AUD$270.00
 
Brake Calipers, matching pair alloy twin piston calipers, right & left sides, for front brakes
PART NUMBER:CAL032x2
Qty:

View Product Details 		Front Disc Rotors AUD$80.00
 
Front Disc Rotors, 180mm dia, 4mm steel slotted, suits FWH-04 Front Wheel Disc Hubs only. Suits Sidewinder, Piranha & Barracuda.
PART NUMBER:DBR032
Qty:

View Product Details 		Front Wheel Hubs (with Disc Rotor Mount) AUD$165.00
 
Front Wheel hubs with disc rotor mount, alloy, 4 Stud 156mm PCD, 7/16" UNF Studs, nuts, taper roller bearings & seals.
PART NUMBER:FWH-04
Qty:

View Product Details 		Front Hose Setup AUD$95.01
 
Front Hose set up. Runs from Master Cylinder to both front calipers, braided stainless hose, 2 individual hoses.
PART NUMBER:HSE-03
Qty:

View Product Details 		Master Cylinder (5/8") AUD$56.00
 
Master Cylinder 5/8" girling type
PART NUMBER:MSC-01
Qty:

View Product Details 		Pedal Box (Brake) AUD$135.00
 
Pedal Box complete with Pedal, Pushrod, Clevis, Master Cylinder. NOTE: We run separate Pedal Box for front & rear brakes mounted side by side. Both pedals can be pressed together & by rocking your foot you can control front & rear braking
PART NUMBER:PEDBOX-2
Qty:

View Product Details 		Pushrod and Clevis (Master Cylinder) AUD$13.00
 
Pushrod & Clevis for Master Cylinder
PART NUMBER:PSHROD
Qty:

Steering wheel flange AUD$16.00
 
Steering wheel flange, has outer bolt pattern of 6 x 5.5mm holes on 70mm PCD as well as inner three hole Go Kart bolt pattern. Can either be welded to steering column as per normal instalation or used as an adaptor plate from three hole to six hole when fitting a larger steering wheel.
PART NUMBER:SB05
Qty:

View Product Details 		FRONT SHOCKS, (Pair) KIT AUD$655.00
 
Front shocks, coilovers, gas filled, heavy duty, 14mm 500 lb coil springs, rebuildable, adjustable preload, 390mm eye to eye. (2)
PART NUMBER:SHOCK 390
Qty:

SLUG-12mm AUD$5.00
 
Slug with 12mm drilled hole, 1", (25.4mm) OD. 40mm long. Used for motorcycle engine mounts that have 12mm mount holes. Also used as shock mounts when making Sidewinder & Piranha front suspension arms, (4 required for front arm application) Not required if purchasing Edge SW07 front suspension arms.
PART NUMBER:SLUG-12mm
Qty:

View Product Details 		Stub Axle Bolts AUD$18.00
 
2 Stub Axle bolts, 12mm. Includes washers & nyloc nuts
PART NUMBER:STB12-2
Qty:

View Product Details 		Stub Axles plain machined. AUD$48.00
 
Machined pair of plain stub axles, comes with castle nuts, washers & split pins, (not required if ordering STUB032)
PART NUMBER:STUB-01
Qty:

View Product Details 		Front Stub Axles (w/ Caliper mounts) AUD$105.00
 
Front Stub axles, left & right, welded & drilled with uprights & steering arms, calliper mounts (2). Suit calipers CAL032x2 & wheel hubs FWH-04. Suits Sidewinder & Piranha.
PART NUMBER:STUB032
Qty:

View Product Details 		Sidewinder/Piranha Front Swing Arms AUD$265.00
 
Front swing arms, right & left, Fully welded & drilled.
PART NUMBER:SW07
Qty:

View Product Details 		Front Swing Arm pivot bushes, (4) AUD$28.01
 
Front swing arm pivot bushes, Acetal (4).
PART NUMBER:SW08
Qty:

View Product Details 		Front Swing Axle Pivot Pins (2) AUD$30.00
 
Front Swing Axle Pivot Pins with nuts & washers (2)
PART NUMBER:SW09
Qty: