Email:
Password:  
Sidewinder Chassis Components
 

Sidewinder Chassis Components
NOTE: Prices show include 10% GST, which only applies to Australian customers. USA residents will only pay approx 107% of list prices quoted due to EXCHANGE rates. Click here to check the value in your local currency.

View Product Details 		Accelerator Pedal Spring AUD$4.00
 
Accelerator pedal spring, used on all Edge buggies.
PART NUMBER:ACCEL SPRING
Qty:

View Product Details 		Arm Restraints AUD$57.00
 
ARM RESTRAINTS, designed to stop your arms flying
PART NUMBER:ARM RESTRAIN
Qty:

View Product Details 		Banjo Bolt AUD$7.00
 
Banjo Bolt with crush washers, M10x1.25, used to connect brake hose to master cylinder, another used to connect brake hose to Caliper.
PART NUMBER:BB-01
Qty:

View Product Details 		10mm Studded Rod End AUD$14.00
 
10mm studded rod end used on gear change linkage (
PART NUMBER:BL10D-1
Qty:

View Product Details 		Fibreglass Bonnet AUD$135.00
 
Fibreglass Bonnet, designed for Taipan, Sidewinder
PART NUMBER:BONNET 1
Qty:

View Product Details 		Clutch Lever AUD$22.00
 
Clutch Lever, motorcycle shorty type, fits onto ge
PART NUMBER:C-LEVER
Qty:

View Product Details 		High Back Rally Seat AUD$265.00
 
High back rally seat, fibreglass, smooth internal finish, black colour. Mounts through seat base.
PART NUMBER:EP17
Qty:

View Product Details 		4 Point Race Harness(CAMS Approved) AUD$192.01
 
4 point Race Harness, CAMS approved, 50mm wide strapping
PART NUMBER:HAR-4
Qty:

View Product Details 		5 Point Race Harness (CAMS Approved) AUD$240.41
 
5 Point Race Harness, 3" webbing with Link & Latch buckle. Legal for CAMS racing. Can be used as a 4 point if required. (not required if buying HAR-4).
PART NUMBER:HAR-5
Qty:

View Product Details 		Stainless Steel Hydraulic Brake Hose (2.1m) AUD$92.00
 
Hydraulic Brake Hose, stainless steel braided, 2.1 metres long with Banjo fittings each end
PART NUMBER:HSE-01
Qty:

View Product Details 		Gear Change Lever AUD$29.00
 
Gear-change Lever
PART NUMBER:HYP-14
Qty:

View Product Details 		Master Cylinder (5/8") AUD$56.00
 
Master Cylinder 5/8" girling type
PART NUMBER:MSC-01
Qty:

View Product Details 		Pedal AUD$25.00
 
Pedal, laser cut racing desgin with Acetal pivot bushes. Fits Pedal Box
PART NUMBER:PEDAL
Qty:

View Product Details 		Pedal Box Housing AUD$59.00
 
Pedal box housing used to mount pedal and master cylinder
PART NUMBER:PEDBOX
Qty:

View Product Details 		Pedal Box (Brake) AUD$135.00
 
Pedal Box complete with Pedal, Pushrod, Clevis, Master Cylinder. NOTE: We run separate Pedal Box for front & rear brakes mounted side by side. Both pedals can be pressed together & by rocking your foot you can control front & rear braking
PART NUMBER:PEDBOX-2
Qty:

View Product Details 		Pedal Box (Throttle) AUD$98.00
 
Throttle pedal box complete with pedal.
PART NUMBER:PEDBOX-3
Qty:

View Product Details 		Pushrod and Clevis (Master Cylinder) AUD$13.00
 
Pushrod & Clevis for Master Cylinder
PART NUMBER:PSHROD
Qty:

View Product Details 		XRV Rack and Pinion Mount Plate AUD$22.00
 
Rack and Pinion weld in mount plate to suit XRV Rack and Pinion for Sidewinder and Piranha
PART NUMBER:RACKMNT
Qty:

Racing fuel filler cap AUD$64.00
 
RCI racing fuel filler cap, flush mount, includes mounting load ring, ( mounting load ring has studs fitted & hooks up from inside the tank, nuts go on from the outside). Outer flange diameter 151mm. 12 x 1/4" UNF mount studs on 135mm PCD. Inside opening is 76mm.
PART NUMBER:RCI CAP
Qty:

View Product Details 		Rollbars AUD$215.00
 
Rollbars, front & rear, (not required if ordering chassis)
PART NUMBER:ROLL2
Qty:

View Product Details 		FRONT SHOCKS, (Pair) KIT AUD$655.00
 
Front shocks, coilovers, gas filled, heavy duty, 14mm 500 lb coil springs, rebuildable, adjustable preload, 390mm eye to eye. (2)
PART NUMBER:SHOCK 390
Qty:

View Product Details 		Rear Shock (1) KIT AUD$345.00
 
Rear Shock, gas filled heavy duty with 12mm coil springs, Adjustable spring preload, rebuildable, 465mm eye to eye
PART NUMBER:SHOCK465
Qty:

SLUG-10mm AUD$5.00
 
Slug with 10mm drilled hole, 1", (25.4mm) OD. 40mm long. Used for motorcycle engine mounts that have 10mm mount holes.
PART NUMBER:SLUG-10mm
Qty:

SLUG-12mm AUD$5.00
 
Slug with 12mm drilled hole, 1", (25.4mm) OD. 40mm long. Used for motorcycle engine mounts that have 12mm mount holes. Also used as shock mounts when making Sidewinder & Piranha front suspension arms, (4 required for front arm application) Not required if purchasing Edge SW07 front suspension arms.
PART NUMBER:SLUG-12mm
Qty:

SLUG-16mm AUD$5.00
 
Slug with 16mm drilled hole, 1", (25.4mm) OD. 40mm long. Used for motorcycle engine mounts that have 16mm mount holes. Also used to make Raven, Fun Kart II & Trax II & Belcranks & lock collars, as well as the Raven brake bar. (Not required if buying these parts pre-fabricated from The Edge).
PART NUMBER:SLUG-16mm
Qty:

View Product Details 		Bare Sidewinder Chassis (Fully Welded) AUD$1,095.01
 
Chassis, fully welded & drilled with rollbars & all brackets welded on new "Sidewinder Plus" narrow nose shape
PART NUMBER:SW01
Qty:

View Product Details 		Fuel Tank (Left Mounting) AUD$245.00
 
Fuel Tank, steel, 25 litre, left side mounting
PART NUMBER:SW12
Qty:

View Product Details 		Complete Sidewinder Chassis (Fully Welded) AUD$2,100.01
 
Fully welded chassis, Front suspension arms, front stub axles, stub bushes, pivot pins, wheel hubs. Rear suspension arm, pivot bushes, pivot pin, rear axle,rear wheel hubs, bearings & flanges.
PART NUMBER:SW20
Qty:

View Product Details 		Throttle Cable (1.5m) AUD$27.00
 
Throttle Cable 1.5 metres long, can be trimmed to length.
PART NUMBER:SW23
Qty:

View Product Details 		Sidewinder Chassis Bracket Kit AUD$210.60
 
Laser cut bracket kit for chassis only. 27 parts. Includes front & rear shock mounts, column mounts, harness mounts, front & rear arm mounts, pivot pin retainers. Not required if ordering SWPACK or SW01.
PART NUMBER:SW35
Qty:

Top front shock mounts AUD$35.00
 
Top front shock mount plates for the Sidewinder Plus & Piranha series II, 6mm laser cut steel.(Not required if ordering SW35, PIR20 or PIR21)
PART NUMBER:SW40
Qty:

View Product Details 		Sidewinder Chassis Frame Pack AUD$625.01
 
Chassis Frame pack, pre-cut & drilled, pre-bent rollbars & all mount brackets, just needs welding. (not required if ordering SW01)
PART NUMBER:SWPACK
Qty: