Email:
Password:  
Piranha Steering
 

Piranha Steering
NOTE: Prices show include 10% GST, which only applies to Australian customers. USA residents will only pay approx 107% of list prices quoted due to EXCHANGE rates. Click here to check the value in your local currency.

View Product Details 		Banjo Bolt AUD$7.00
 
Banjo Bolt with crush washers, M10x1.25, used to connect brake hose to master cylinder, another used to connect brake hose to Caliper.
PART NUMBER:BB-01
Qty:

View Product Details 		Double Banjo Bolt AUD$9.00
 
Double Banjo bolt, M10x1.25, adapts two front brake hoses to master cylinder. Comes with three crush washers.
PART NUMBER:BB-03
Qty:

View Product Details 		Front Brake Kit AUD$635.00 (save $115.00)
 9 days left!
All the above parts to set up Front Brakes, including FWH-04 hubs, DBR032 rotors, CAL032 calipers, BB-01 banjo bolts, STUB032 stub axles, HSE-03 front brake hoses, BB-03 double banjo bolt, PEDBOX-2 brake pedal box, all nuts & bolts. For front left & right hand wheels. Suits Sidewinder & Piranha
PART NUMBER:BRAKE KIT
Qty:

View Product Details 		Stub Axle Bushes (4) AUD$23.00
 
4 x Stub Axle Bushes (acetal)fit into ends of stub axle pivot tube. (set of 4).
PART NUMBER:BSH12-4
Qty:

View Product Details 		Brake Caliper (Twin Piston) (Pair) AUD$270.00
 
Brake Calipers, matching pair alloy twin piston calipers, right & left sides, for front brakes
PART NUMBER:CAL032x2
Qty:

View Product Details 		Front Disc Rotors AUD$80.00
 
Front Disc Rotors, 180mm dia, 4mm steel slotted, suits FWH-04 Front Wheel Disc Hubs only. Suits Sidewinder, Piranha & Barracuda.
PART NUMBER:DBR032
Qty:

View Product Details 		Steering Bush AUD$11.00
 
Steering bush that fits in cut off side of Ford Escort rack & pinion. (steel)
PART NUMBER:ESCORTBSH
Qty:

View Product Details 		Front Wheel Hubs (with Disc Rotor Mount) AUD$165.00
 
Front Wheel hubs with disc rotor mount, alloy, 4 Stud 156mm PCD, 7/16" UNF Studs, nuts, taper roller bearings & seals.
PART NUMBER:FWH-04
Qty:

View Product Details 		Front Hose Setup AUD$95.01
 
Front Hose set up. Runs from Master Cylinder to both front calipers, braided stainless hose, 2 individual hoses.
PART NUMBER:HSE-03
Qty:

View Product Details 		Steering Column Pivot Bushes AUD$39.01
 
Steering column pivot buses and clamps
PART NUMBER:HYP12
Qty:

View Product Details 		Pedal Box (Brake) AUD$135.00
 
Pedal Box complete with Pedal, Pushrod, Clevis, Master Cylinder. NOTE: We run separate Pedal Box for front & rear brakes mounted side by side. Both pedals can be pressed together & by rocking your foot you can control front & rear braking
PART NUMBER:PEDBOX-2
Qty:

View Product Details 		1/2" Steering Tie Rod Ends AUD$60.01
 
Steering tie rod ends 1/2" UNF female with nylon inserts, 1/2" UNF studded shanks
PART NUMBER:PF58G
Qty:

View Product Details 		Steering Rack Boot AUD$14.00
 
Universal steering rack boot (Use to replace old boots on Mini or Escort rack & pinion)
PART NUMBER:RACKBOOT
Qty:

View Product Details 		XRV Rack and Pinion Mount Plate AUD$22.00
 
Rack and Pinion weld in mount plate to suit XRV Rack and Pinion for Sidewinder and Piranha
PART NUMBER:RACKMNT
Qty:

View Product Details 		Steering Boss (22mm Centre) AUD$6.01
 
Steering Boss, 3 hole Mount, 22mm centre
PART NUMBER:SB02
Qty:

View Product Details 		Steering Wheel Flange (6.5mm/74mm) AUD$16.01
 
Steering wheel flange, 6 x 6.5mm holes on 74mm PCD, (not required if ordering SB04).
PART NUMBER:SB03
Qty:

View Product Details 		Steering Wheel Flange (5.5mm/70mm) AUD$16.01
 
Steering wheel flange, 6 x 5.5mm holes on 70mm PCD, (not required if ordering SB03).
PART NUMBER:SB04
Qty:

Steering wheel flange AUD$16.00
 
Steering wheel flange, has outer bolt pattern of 6 x 5.5mm holes on 70mm PCD as well as inner three hole Go Kart bolt pattern. Can either be welded to steering column as per normal instalation or used as an adaptor plate from three hole to six hole when fitting a larger steering wheel.
PART NUMBER:SB05
Qty:

View Product Details 		Stub Axle Bolts AUD$18.00
 
2 Stub Axle bolts, 12mm. Includes washers & nyloc nuts
PART NUMBER:STB12-2
Qty:

View Product Details 		Front Stub Axles (w/ Caliper mounts) AUD$105.00
 
Front Stub axles, left & right, welded & drilled with uprights & steering arms, calliper mounts (2). Suit calipers CAL032x2 & wheel hubs FWH-04. Suits Sidewinder & Piranha.
PART NUMBER:STUB032
Qty:

View Product Details 		Nylon Steering Wheel AUD$70.00
 
Steering wheel, Nylon, 3 spoke, 3 hole mount
PART NUMBER:STW-01
Qty:

View Product Details 		13.5" Steering Wheel AUD$125.00
 
Steering wheel, 13.5” 3 spoke, contoured thumb grips, suits SB04 or SB05 Flange.
PART NUMBER:STW-02
Qty:

View Product Details 		Steering Rack Mount AUD$48.00
 
Steering Rack Mount, suits escort rack
PART NUMBER:SW30
Qty:

View Product Details 		Rack and Pinion, KIT AUD$460.01
 
Rack and Pinion. 1/2 turn lock, with adjustable gear mesh. Includes tie rods to suit Sidewinder and Piranha as well as input shaft adaptor
PART NUMBER:XRV RACK
Qty: