Email:
Password:  
Piranha Standard Rear Suspension
 

Piranha Standard Rear Suspension
NOTE: Prices show include 10% GST, which only applies to Australian customers. USA residents will only pay approx 107% of list prices quoted due to EXCHANGE rates. Click here to check the value in your local currency.

View Product Details 		Supension Arm Pivot Bushes (8) AUD$56.01
 
Suspension Arm Pivot Bushes, Acetal (set of 8)
PART NUMBER:BSH16-8
Qty:

View Product Details 		Brake Caliper (Twin Piston) AUD$135.00
 
Brake Caliper, alloy twin piston for rear brakes,
PART NUMBER:CAL032
Qty:

View Product Details 		530 Pitch Drive Chain AUD$87.00
 
Drive Chain, 530 pitch, Heavy duty motorcycle O-ring chain, 114 links with connector, 7500 psi tensile rating.
PART NUMBER:CH530-114
Qty:

Chain join link 530 AUD$11.00 (save $4.00)
 2 days left!
Spare Connector link for Edge CH530-114 530 O-Ring chain.
PART NUMBER:CH530 CON
Qty:

View Product Details 		Shock Mount Spacers (8) AUD$24.00
 
Shock mount spacers, set of 8 for rear shocks.
PART NUMBER:DA07
Qty:

View Product Details 		Rear Disc Rotors AUD$65.01
 
Rear Disc rotor. 280mm dia, 4mm thick, slotted with 4 hole mount. Suits PIR07 drive hub
PART NUMBER:DBR-04
Qty:

View Product Details 		Floating Rotor (280mm) AUD$135.00
 
Upgrade 280mm diameter floating rotor, 5mm thick, replaces DBR04 Piranha rear rotor for either the Piranha single A arm or Double A arm rear suspensions.
PART NUMBER:DBR280PIR
Qty:

View Product Details 		Stainless Steel Rear Brake Hose (2.4m) AUD$97.01
 
Rear brake hose, stainless steel braided with Banjo fitting each end. 2.4 metres long.
PART NUMBER:HSE-04
Qty:

Rear Axles (2) AUD$210.00
 
Rear axles, (2) Splined shafts with 4 stud wheel hubs, 115mm PCD, includes studs & nuts
PART NUMBER:IND-08
Qty:

View Product Details 		Rear End Housing Plates AUD$135.00
 
Laser cut plates for Rear end housing, 4 plates, sides front & back. Just needs welding.
PART NUMBER:PIR02
Qty:

View Product Details 		Centre Shaft/Axle Bearings (3/8") (6) AUD$99.00 (save $26.00)
 4 days left!
Bearings for centre shaft & axles, 1 3/8”, 6 bearings.
PART NUMBER:PIR04
Qty:

View Product Details 		Bearing Clamp Flanges AUD$55.00
 
Bearing clamp flanges to suit bearings for centre shaft & axles, 6 pair, (12).
PART NUMBER:PIR05
Qty:

View Product Details 		Centre Shaft (3/8" 6 Spline) AUD$86.00
 
Centre shaft , 1 3/8” six spline, 306mm long with machined grooves.
PART NUMBER:PIR06
Qty:

View Product Details 		Drive Hub (3/8" 6 Spline) AUD$75.00
 
Drive Hub, 1 3/8” six spline bore with 4 bolt flange. (suits SPR530-50/66/60 & DBR04) (each) 2 req’d
PART NUMBER:PIR07
Qty:

View Product Details 		Rear Suspension Arms (Fully Welded) AUD$296.00
 
Rear suspension arms, right & left, fully welded
PART NUMBER:PIR09
Qty:

View Product Details 		Rear Suspension Arm Plates AUD$95.01
 
Laser cut plates for Rear suspension arms, Includes 2 x Inner plates, 2 x Outer plates, 4 x Shock upright plates, 2 x Rear arm stiffners. Not required if ordering PIR09.
PART NUMBER:PIR10
Qty:

View Product Details 		Rear Suspension Arm Pivot Bolts (M16) AUD$23.00
 
Rear suspension arm pivot bolts, M16 with nuts & washers
PART NUMBER:PIR11
Qty:

View Product Details 		Rear Drive Shafts, KIT AUD$475.00
 
Rear Drive Shafts, Uni Joint type, Fit between Centre shaft & Axles. Left & right side.
PART NUMBER:PIR12
Qty:

View Product Details 		Rear End Kitset AUD$1,885.00
 
Complete rear end kitset. Hub to Hub.
PART NUMBER:PIR17
Qty:

View Product Details 		Adjuster Plates AUD$78.00
 
Laser cut Adjuster plates. 2 x Adjuster plates, 2 x Adjuster backing plates, caliper spacer. Nuts & bolts to mount caliper. One plate incorporates caliper mount for 032 caliper
PART NUMBER:PIR22
Qty:

View Product Details 		Rear Wheel Plates AUD$62.01
 
"Laser cut Rear wheel plates, 4 stud 115mm PCD with splined bore. Includes 2 x wheel hubs, 4 x 8mm thick Stiffner plates. Not required if ordering IND-08."
PART NUMBER:PIR23
Qty:

CV joint adaptor kit for Piranha AUD$640.00
 
Adaptor kit to fit Porsche 924 axles & CV joints to the Piranha. Includes the following parts: 1x Splined Centre shaft, 2 x Splined axles with billet wheel hubs, (4 stud 115mm PCD) 4 x CV splined adaptor hubs, 4 x retaining bolts & washers. To suit type 2 CV joints of 6 x M8 bolts on 86mm PCD. This kit suits Single or Double A arm rear suspensions & replaces parts PIR06 & IND-08. Part PIR12, (driveshafts) are replaced by purchasing original Porsche 924 CV joint/axle assemblies. Instead of
PART NUMBER:PIR924-KIT
Qty:

View Product Details 		Rear Wheel Hubs AUD$132.00
 
Rear wheel hubs only, Machined from solid 1045 bar, 1 1/4” bore, 4 stud 101.6mm PCD with studs & nuts. Please advise if you require a different stud pattern. (hubs not required if ordering rear axle).
PART NUMBER:RWH-02
Qty:

Rear Wheel hubs blank AUD$115.00
 
Wheel hub, Blank no holes, 1 1/4", (31.75mm) bore, 137mm outside diameter, 63mm location diameter, 8mm thick flange. Machined from 1045 Billet steel. No stud pattern drilled so you can drill to your own wheel pattern. Pair, (2).
PART NUMBER:RWH-BLANK
Qty:

View Product Details 		REAR SHOCKS, (Pair) KIT AUD$765.00
 
Rear shocks, coilover, gas filled, heavy duty, 12mm coils, rebuildable, 750mm eye to eye. (2) Suits Piranha series II.
PART NUMBER:SHOCK 750R
Qty:

View Product Details 		Rear Sprocket (50 tooth,530 Pitch) AUD$72.00
 
Rear Sprocket, 50 tooth, 530 pitch, Suits Piranha PIR07 drive hub or Sidewinder MHU-01, Has mount holes for Sidewinder SPROK GUIDE plates (use either 50, 51, 55 or 60 tooth sprocket).
PART NUMBER:SPR530-50
Qty:

View Product Details 		Rear Sprocket (55 tooth,530 Pitch) AUD$72.00
 
Rear Sprocket, 55 tooth, 530 pitch, Suits Piranha PIR07 drive hub or Sidewinder MHU-01 (use either 50, 51, 55 or 60 tooth sprocket).
PART NUMBER:SPR530-55
Qty:

View Product Details 		Rear Sprocket (60 tooth,530 Pitch) AUD$75.00
 
Rear Sprocket, 60 tooth, 530 pitch, Suits Piranha PIR07 drive hub. (use either 50, 55 or 60 tooth sprocket).
PART NUMBER:SPR530-60
Qty:

View Product Details 		Rear Sprocket (51 tooth/530 Pitch) AUD$72.00
 
Rear Sprocket, 51 tooth, 530 pitch, Suits Sidewinder or Piranha, Has mount holes for Sidewinder SPROK GUIDE plates.
PART NUMBER:SPR530-51
Qty: