Email:
Password:  
Piranha Options And Accessories
 

Piranha Options And Accessories
NOTE: Prices show include 10% GST, which only applies to Australian customers. USA residents will only pay approx 107% of list prices quoted due to EXCHANGE rates. Click here to check the value in your local currency.

View Product Details 		Brake Pad AUD$32.00
 
032 PAD, Spare brake pads to suit The Edge Products CAL032 rear caliper.
PART NUMBER:032 PAD
Qty:

View Product Details 		Accelerator Pedal Spring AUD$4.00
 
Accelerator pedal spring, used on all Edge buggies.
PART NUMBER:ACCEL SPRING
Qty:

View Product Details 		Arm Restraints AUD$57.00
 
ARM RESTRAINTS, designed to stop your arms flying
PART NUMBER:ARM RESTRAIN
Qty:

BAT260 AUD$160.00
 
Battery, 12 volt, 260 CCA, (cold cranking amps). 26 AH, (amp hours) AGM type, (Absorbed glass matt) fully sealed, requires no maintenance. Can be mounted at any angle. Dimensions: 175mm Long x 166mm wide x 125mm tall. Weight = 8 kg Amp-Tech brand.
PART NUMBER:BAT260
Qty:

View Product Details 		Banjo Bolt AUD$7.00
 
Banjo Bolt with crush washers, M10x1.25, used to connect brake hose to master cylinder, another used to connect brake hose to Caliper.
PART NUMBER:BB-01
Qty:

View Product Details 		Double Banjo Bolt AUD$9.00
 
Double Banjo bolt, M10x1.25, adapts two front brake hoses to master cylinder. Comes with three crush washers.
PART NUMBER:BB-03
Qty:

View Product Details 		Fibreglass Bonnet AUD$135.00
 
Fibreglass Bonnet, designed for Taipan, Sidewinder
PART NUMBER:BONNET 1
Qty:

View Product Details 		Front Brake Kit AUD$635.00 (save $115.00)
 3 days left!
All the above parts to set up Front Brakes, including FWH-04 hubs, DBR032 rotors, CAL032 calipers, BB-01 banjo bolts, STUB032 stub axles, HSE-03 front brake hoses, BB-03 double banjo bolt, PEDBOX-2 brake pedal box, all nuts & bolts. For front left & right hand wheels. Suits Sidewinder & Piranha
PART NUMBER:BRAKE KIT
Qty:

View Product Details 		Brake Caliper (Twin Piston) (Pair) AUD$270.00
 
Brake Calipers, matching pair alloy twin piston calipers, right & left sides, for front brakes
PART NUMBER:CAL032x2
Qty:

Chain join link 530 AUD$11.00 (save $4.00)
 1 day left!
Spare Connector link for Edge CH530-114 530 O-Ring chain.
PART NUMBER:CH530 CON
Qty:

View Product Details 		Front Disc Rotors AUD$80.00
 
Front Disc Rotors, 180mm dia, 4mm steel slotted, suits FWH-04 Front Wheel Disc Hubs only. Suits Sidewinder, Piranha & Barracuda.
PART NUMBER:DBR032
Qty:

View Product Details 		Fuel Filter AUD$6.01
 
Fuel Filter, Inline plastic filter
PART NUMBER:F-FILTER
Qty:

View Product Details 		Front Wheel Hubs (5 Stud HT Pattern) AUD$65.01
 
Front Wheel Hubs (steel) 5 stud H-T pattern. Includes studs, nuts, bearings, seals & dust caps
PART NUMBER:FWH-01
Qty:

View Product Details 		Front Wheel Bearings AUD$50.00
 
Suits all Edge buggies, (except Raven) Front wheel
PART NUMBER:FWH-BEAR
Qty:

View Product Details 		4 Point Race Harness(CAMS Approved) AUD$192.01
 
4 point Race Harness, CAMS approved, 50mm wide strapping
PART NUMBER:HAR-4
Qty:

View Product Details 		5 Point Race Harness (CAMS Approved) AUD$240.41
 
5 Point Race Harness, 3" webbing with Link & Latch buckle. Legal for CAMS racing. Can be used as a 4 point if required. (not required if buying HAR-4).
PART NUMBER:HAR-5
Qty:

View Product Details 		Front Hose Setup AUD$95.01
 
Front Hose set up. Runs from Master Cylinder to both front calipers, braided stainless hose, 2 individual hoses.
PART NUMBER:HSE-03
Qty:

M8CLEVIS AUD$8.00
 
M8 clevis. With quick disconnect pin. M8x1.25 female thread. Used for brake master cylinders or gear shift linkages.
PART NUMBER:M8CLEVIS
Qty:

View Product Details 		Sports Bike Muffler AUD$380.00
 
Stainless steel sports bike muffler, Hayabusa 3 hole mount flange.
PART NUMBER:MUFFLER-SS
Qty:

View Product Details 		Pedal AUD$25.00
 
Pedal, laser cut racing desgin with Acetal pivot bushes. Fits Pedal Box
PART NUMBER:PEDAL
Qty:

View Product Details 		Pedal Box (Brake) AUD$135.00
 
Pedal Box complete with Pedal, Pushrod, Clevis, Master Cylinder. NOTE: We run separate Pedal Box for front & rear brakes mounted side by side. Both pedals can be pressed together & by rocking your foot you can control front & rear braking
PART NUMBER:PEDBOX-2
Qty:

View Product Details 		Replacement Driveshaft Boots for PIR12 AUD$48.00
 
Replacement boots for PIR12 driveshafts.
PART NUMBER:PIR12BOOT
Qty:

CV joint adaptor kit for Piranha AUD$640.00
 
Adaptor kit to fit Porsche 924 axles & CV joints to the Piranha. Includes the following parts: 1x Splined Centre shaft, 2 x Splined axles with billet wheel hubs, (4 stud 115mm PCD) 4 x CV splined adaptor hubs, 4 x retaining bolts & washers. To suit type 2 CV joints of 6 x M8 bolts on 86mm PCD. This kit suits Single or Double A arm rear suspensions & replaces parts PIR06 & IND-08. Part PIR12, (driveshafts) are replaced by purchasing original Porsche 924 CV joint/axle assemblies. Instead of
PART NUMBER:PIR924-KIT
Qty:

View Product Details 		Steering Rack Boot AUD$14.00
 
Universal steering rack boot (Use to replace old boots on Mini or Escort rack & pinion)
PART NUMBER:RACKBOOT
Qty:

Rack & Pinion gear set AUD$185.00
 
Spare rack & pinion gearset to suit Edge rack & pinion, made from heat treated & ground 4140 steel.
PART NUMBER:RACKGEAR
Qty:

View Product Details 		XRV Rack and Pinion Mount Plate AUD$22.00
 
Rack and Pinion weld in mount plate to suit XRV Rack and Pinion for Sidewinder and Piranha
PART NUMBER:RACKMNT
Qty:

Racing fuel filler cap AUD$64.00
 
RCI racing fuel filler cap, flush mount, includes mounting load ring, ( mounting load ring has studs fitted & hooks up from inside the tank, nuts go on from the outside). Outer flange diameter 151mm. 12 x 1/4" UNF mount studs on 135mm PCD. Inside opening is 76mm.
PART NUMBER:RCI CAP
Qty:

Set of 4 mount rubbers AUD$6.00
 
Set of 4 mounting rubbers, used as issolation mounts for fuel tanks, radiators, seats & other items, 30mm outside diameter x 15mm thick, 10mm hole. (set of 4)
PART NUMBER:RUBBERS
Qty:

SLUG-10mm AUD$5.00
 
Slug with 10mm drilled hole, 1", (25.4mm) OD. 40mm long. Used for motorcycle engine mounts that have 10mm mount holes.
PART NUMBER:SLUG-10mm
Qty:

SLUG-12mm AUD$5.00
 
Slug with 12mm drilled hole, 1", (25.4mm) OD. 40mm long. Used for motorcycle engine mounts that have 12mm mount holes. Also used as shock mounts when making Sidewinder & Piranha front suspension arms, (4 required for front arm application) Not required if purchasing Edge SW07 front suspension arms.
PART NUMBER:SLUG-12mm
Qty:

SLUG-16mm AUD$5.00
 
Slug with 16mm drilled hole, 1", (25.4mm) OD. 40mm long. Used for motorcycle engine mounts that have 16mm mount holes. Also used to make Raven, Fun Kart II & Trax II & Belcranks & lock collars, as well as the Raven brake bar. (Not required if buying these parts pre-fabricated from The Edge).
PART NUMBER:SLUG-16mm
Qty:

Rear Sprocket (45 tooth,530 Pitch) AUD$72.00
 
Rear Sprocket, 45 tooth, 530 Pitch, Suits Piranha PIR07 drive hub or universal MHU-01 drive hub.
PART NUMBER:SPR530-45
Qty:

View Product Details 		Front Stub Axles (w/ Caliper mounts) AUD$105.00
 
Front Stub axles, left & right, welded & drilled with uprights & steering arms, calliper mounts (2). Suit calipers CAL032x2 & wheel hubs FWH-04. Suits Sidewinder & Piranha.
PART NUMBER:STUB032
Qty:

View Product Details 		Fuel Tap AUD$18.01
 
Fuel tap, heavy duty ball valve, chrome plated brass with ¼” BSP female threads each end.
PART NUMBER:TAP-01
Qty:

View Product Details 		Wheel Nut AUD$1.50
 
Spare 7/16” UNF wheelnuts
PART NUMBER:WHEELNUT
Qty:

View Product Details 		Wheel Stud AUD$2.00
 
Spare 7/16”UNF knurled head wheel studs
PART NUMBER:WHEELSTUD
Qty:

View Product Details 		Rack and Pinion, KIT AUD$460.01
 
Rack and Pinion. 1/2 turn lock, with adjustable gear mesh. Includes tie rods to suit Sidewinder and Piranha as well as input shaft adaptor
PART NUMBER:XRV RACK
Qty: