Email:
Password:  
Piranha Chassis Components
 

Piranha Chassis Components
NOTE: Prices show include 10% GST, which only applies to Australian customers. USA residents will only pay approx 107% of list prices quoted due to EXCHANGE rates. Click here to check the value in your local currency.

View Product Details 		Accelerator Pedal Spring AUD$4.00
 
Accelerator pedal spring, used on all Edge buggies.
PART NUMBER:ACCEL SPRING
Qty:

View Product Details 		Arm Restraints AUD$57.00
 
ARM RESTRAINTS, designed to stop your arms flying
PART NUMBER:ARM RESTRAIN
Qty:

View Product Details 		Banjo Bolt AUD$7.00
 
Banjo Bolt with crush washers, M10x1.25, used to connect brake hose to master cylinder, another used to connect brake hose to Caliper.
PART NUMBER:BB-01
Qty:

View Product Details 		10mm Studded Rod End AUD$14.00
 
10mm studded rod end used on gear change linkage (
PART NUMBER:BL10D-1
Qty:

View Product Details 		Fibreglass Bonnet AUD$110.00
 
Fibreglass Bonnet, designed for Taipan, Sidewinder
PART NUMBER:BONNET 1
Qty:

View Product Details 		Clutch Lever AUD$22.00
 
Clutch Lever, motorcycle shorty type, fits onto ge
PART NUMBER:C-LEVER
Qty:

View Product Details 		High Back Rally Seat AUD$265.00
 
High back rally seat, fibreglass, smooth internal finish, black colour. Mounts through seat base.
PART NUMBER:EP17
Qty:

View Product Details 		4 Point Race Harness(CAMS Approved) AUD$192.01
 
4 point Race Harness, CAMS approved, 50mm wide strapping
PART NUMBER:HAR-4
Qty:

View Product Details 		5 Point Race Harness (CAMS Approved) AUD$240.41
 
5 Point Race Harness, 3" webbing with Link & Latch buckle. Legal for CAMS racing. Can be used as a 4 point if required. (not required if buying HAR-4).
PART NUMBER:HAR-5
Qty:

View Product Details 		Gear Change Lever AUD$29.00
 
Gear-change Lever
PART NUMBER:HYP-14
Qty:

View Product Details 		Master Cylinder (5/8") AUD$52.00
 
Master Cylinder 5/8" girling type
PART NUMBER:MSC-01
Qty:

View Product Details 		Pedal AUD$25.00
 
Pedal, laser cut racing desgin with Acetal pivot bushes. Fits Pedal Box
PART NUMBER:PEDAL
Qty:

View Product Details 		Pedal Box Housing AUD$59.00
 
Pedal box housing used to mount pedal and master cylinder
PART NUMBER:PEDBOX
Qty:

View Product Details 		Pedal Box (Brake) AUD$135.00
 
Pedal Box complete with Pedal, Pushrod, Clevis, Master Cylinder. NOTE: We run separate Pedal Box for front & rear brakes mounted side by side. Both pedals can be pressed together & by rocking your foot you can control front & rear braking
PART NUMBER:PEDBOX-2
Qty:

View Product Details 		Pedal Box (Throttle) AUD$98.00
 
Throttle pedal box complete with pedal.
PART NUMBER:PEDBOX-3
Qty:

View Product Details 		Piranha Chassis (Fully Welded) AUD$1,285.00
 
Chassis fully welded & drilled with rollbars & all
PART NUMBER:PIR01
Qty:

View Product Details 		Fuel Tank (Right) AUD$245.00
 
Fuel tank, steel, 25 litre, right side mounting
PART NUMBER:PIR13
Qty:

View Product Details 		Piranha Chassis Bracket Kit AUD$285.01
 
Laser cut bracket kit for Chassis only. 41 parts. Includes PIR02 rear housing, front and rear shock mounts, coloumn mounts, harness mounts, front arm mounts, pivot pin retainers. (Not required if ordering PIRPACK or PIR01).
PART NUMBER:PIR20
Qty:

View Product Details 		Piranha Chassis Bracket Kit (with Double A Housing) AUD$295.01
 
Same as PIR20 laser cut bracket kit, but includes DA01 Double A arm rear housing (Not required if ordering PIRDAPAC or PIR01)
PART NUMBER:PIR21
Qty:

View Product Details 		Fuel Tank (Tail) AUD$255.00
 
Fuel tank, steel, 15 litres fits in tail of chassis, (not required if using side tanks SW12 & PIR13)
PART NUMBER:PIR24
Qty:

View Product Details 		Piranha Chassis Frame Pack (with Double A Housing) (Unwelded) AUD$715.00
 
Chassic frame pack with Double a arm rear housing, pre cut & drilled, pre-bent rollbars & all mount breaketc, Just needs wleding (this kit not required if ordering PIR01 or PIRPAC).
PART NUMBER:PIRDAPAC
Qty:

View Product Details 		Piranha Read Downbars AUD$125.00
 
Piranha rear downbars
PART NUMBER:PIRDWNBAR
Qty:

View Product Details 		Piranha Chassis (Unwelded) AUD$705.00
 
Chassis frame pack, pre cut & drilled, pre-bent rollbars & all mount brackets, (PIR20) Just needs welding. (this kit not required if ordering PIR01).
PART NUMBER:PIRPAC
Qty:

View Product Details 		Throttle Cable (2300mm) AUD$34.00
 
Throttle cable, 2.3 metres long, can be trimmed to length
PART NUMBER:PN07
Qty:

View Product Details 		Pushrod and Clevis (Master Cylinder) AUD$13.00
 
Pushrod & Clevis for Master Cylinder
PART NUMBER:PSHROD
Qty:

View Product Details 		XRV Rack and Pinion Mount Plate AUD$22.00
 
Rack and Pinion weld in mount plate to suit XRV Rack and Pinion for Sidewinder and Piranha
PART NUMBER:RACKMNT
Qty:

Racing fuel filler cap AUD$64.00
 
RCI racing fuel filler cap, flush mount, includes mounting load ring, ( mounting load ring has studs fitted & hooks up from inside the tank, nuts go on from the outside). Outer flange diameter 151mm. 12 x 1/4" UNF mount studs on 135mm PCD. Inside opening is 76mm.
PART NUMBER:RCI CAP
Qty:

View Product Details 		Rollbars AUD$215.00
 
Rollbars, front & rear, (not required if ordering chassis)
PART NUMBER:ROLL2
Qty:

View Product Details 		FRONT SHOCKS, (Pair) KIT AUD$655.00
 
Front shocks, coilovers, gas filled, heavy duty, 14mm coils, rebuildable, adjustable preload, 390mm eye to eye. (2)
PART NUMBER:SHOCK 390
Qty:

View Product Details 		REAR SHOCKS, (Pair) KIT AUD$765.00
 
Rear shocks, coilover, gas filled, heavy duty, 12mm coils, rebuildable, 750mm eye to eye. (2) Suits Piranha series II.
PART NUMBER:SHOCK 750R
Qty:

SLUG-10mm AUD$5.00
 
Slug with 10mm drilled hole, 1", (25.4mm) OD. 40mm long. Used for motorcycle engine mounts that have 10mm mount holes.
PART NUMBER:SLUG-10mm
Qty:

SLUG-12mm AUD$5.00
 
Slug with 12mm drilled hole, 1", (25.4mm) OD. 40mm long. Used for motorcycle engine mounts that have 12mm mount holes. Also used as shock mounts when making Sidewinder & Piranha front suspension arms, (4 required for front arm application) Not required if purchasing Edge SW07 front suspension arms.
PART NUMBER:SLUG-12mm
Qty:

SLUG-16mm AUD$5.00
 
Slug with 16mm drilled hole, 1", (25.4mm) OD. 40mm long. Used for motorcycle engine mounts that have 16mm mount holes. Also used to make Raven, Fun Kart II & Trax II & Belcranks & lock collars, as well as the Raven brake bar. (Not required if buying these parts pre-fabricated from The Edge).
PART NUMBER:SLUG-16mm
Qty:

View Product Details 		Fuel Tank (Left Mounting) AUD$245.00
 
Fuel Tank, steel, 25 litre, left side mounting
PART NUMBER:SW12
Qty:

Top front shock mounts AUD$35.00
 
Top front shock mount plates for the Sidewinder Plus & Piranha series II, 6mm laser cut steel.(Not required if ordering SW35, PIR20 or PIR21)
PART NUMBER:SW40
Qty: