Email:
Password:  
Barracuda Chassis Components
 

Barracuda Chassis Components
NOTE: Prices show include 10% GST, which only applies to Australian customers. USA residents will only pay approx 107% of list prices quoted due to EXCHANGE rates. Click here to check the value in your local currency.

View Product Details 		Accelerator Pedal Spring AUD$4.00
 
Accelerator pedal spring, used on all Edge buggies.
PART NUMBER:ACCEL SPRING
Qty:

View Product Details 		Arm Restraints AUD$57.00
 
ARM RESTRAINTS, designed to stop your arms flying
PART NUMBER:ARM RESTRAIN
Qty:

View Product Details 		Battery Box AUD$124.99
 
BATBX01, Battery box, steel with 3mm Aluminium lid, to suit
PART NUMBER:BATBX01
Qty:

View Product Details 		Barracuda Chassis (Fully Welded) AUD$2,285.00
 
Chassis, fully welded with rollbars all mounting brackets welded in, suspension arm mounts, harness mounts, PIRCV rear housing, Nerf bar mounts, steering mounts.
PART NUMBER:BC1
Qty:

View Product Details 		Nerf Bars (Fully Welded) AUD$310.00
 
Nerf bars, right & left sides, fully welded, (can only be ordered with BC1 chassis)
PART NUMBER:BC2
Qty:

View Product Details 		Nerf Bars (Unwelded) AUD$180.00
 
Nerf bars, pre-bend un-welded kit with 6 laser cut mount brackets.
PART NUMBER:BC2K
Qty:

View Product Details 		Throttle Cable AUD$32.00
 
Throttle cable, 2600mm long, can be trimmed to length. Has 8mm adjuster one end.
PART NUMBER:BC18
Qty:

View Product Details 		Gearshift Lever AUD$41.00
 
Gearshift lever, complete with 2 x Acetal bushes &
PART NUMBER:BC19
Qty:

View Product Details 		Nose Bash Plate AUD$17.00
 
Nose bash plate, 2mm Aluminium sheet
PART NUMBER:BC20
Qty:

View Product Details 		Engine Bash Plate AUD$34.00
 
Engine Bash plate, 3mm Aluminium sheet
PART NUMBER:BC21
Qty:

View Product Details 		Bulkhead Plate AUD$52.00
 
Bulkhead plate, 2mm Aluminium sheet
PART NUMBER:BC22
Qty:

Dash panel AUD$35.00
 
Dash panel to suit Barracuda buggy, 2mm aluminium with two holes to suit 2" gauges, plus holes mount holes & switch holes.
PART NUMBER:BCDASH
Qty:

View Product Details 		Fuel Tank Fittings (3 pieces) AUD$23.99
 
Fuel tank fittings, brass ¼” BSP elbow, ball valve
PART NUMBER:BCFITTING
Qty:

View Product Details 		Barracuda Chassis Bracket Kit AUD$415.00
 
Laser cut bracket kit for chassis only, 79 plates, (Not required if ordering BC1 or BCPAC )
PART NUMBER:BCLAZER
Qty:

Barracuda Chassis Frame Pack (Unwelded) AUD$1,385.00
 
Chassis frame pack, Pre-cut base frame, pre-bent tubes, brace tubes & pre-cut RHS. Pre-bent rollbars & all Laser cut brackets, (BCLAZER) None of the tubes are fishmouthed. (no seat slides) Not required if ordering BC1.
PART NUMBER:BCPAC
Qty:

View Product Details 		Barracuda Floor Pan AUD$85.00
 
Floor pan, 2mm Aluminium sheet, (can only be order
PART NUMBER:BCPAN
Qty:

View Product Details 		Rack and Pinion Mount AUD$34.00
 
Laser cut rack & pinion mount, 3 plates, (not requ
PART NUMBER:BCRACK
Qty:

View Product Details 		Barracuda radiator AUD$420.00
 
Radiator, Brand new Aluminium three core, double bypass. 12” sucker Fan fitted to rear. 26mm Inlet & outlet fittings on lower tank to suit Hayabusa or most types of motorcycle engines. This is what Edge fit to their Barracuda buggies. 360mm wide x 460mm tall. Note: Edge can make a radiator to suit your buggy & change hose fitting sizes & location to suit your engine.
PART NUMBER:BCRAD
Qty:

View Product Details 		Fuel Tank (Tail Mount) AUD$254.99
 
Fuel tank, steel, tail mounted, fully welded with
PART NUMBER:BCTANK
Qty:

Fuel Tank Aluminium AUD$420.00
 
Barracuda 20 litre Aluminium fuel tank, high capacity, racing filler cap. Includes welded on mounts to tank & mount tags ready to weld to chassis. Comes with a welded in flange that fits the in-tank Hayabusa fuel pump.
PART NUMBER:BCTANK-ALU
Qty:

Hayabusa engine mount slugs AUD$35.00
 
Engine mount slugs to mount a Suzuki Hayabusa engine. 4 x 10mm & 4 x 12mm, all 25.4mm diameter & 40mm long. Made from 1020 Steel. These slugs bolt to the engine mount holes to give you an area to weld mounting tubes or plates to. Set of 8. May suit other engines with 10mm & 12mm mount holes.
PART NUMBER:BUSA-MNT
Qty:

View Product Details 		530 Pitch Drive Chain AUD$87.00
 
Drive Chain, 530 pitch, Heavy duty motorcycle O-ring chain, 114 links with connector, 7500 psi tensile rating.
PART NUMBER:CH530-114
Qty:

View Product Details 		Clutch Lever AUD$22.00
 
Clutch Lever, motorcycle shorty type, fits onto ge
PART NUMBER:C-LEVER
Qty:

View Product Details 		High Back Rally Seat AUD$265.00
 
High back rally seat, fibreglass, smooth internal finish, black colour. Mounts through seat base.
PART NUMBER:EP17
Qty:

View Product Details 		Fuel Filter AUD$6.01
 
Fuel Filter, Inline plastic filter
PART NUMBER:F-FILTER
Qty:

View Product Details 		Filler Cap and Spout AUD$52.00
 
Filler cap & spout, steel spout & stainless steel cap. Spout welds to filler spout tube, (not supplied), (not required if ordering BCTANK).
PART NUMBER:FSPOUT
Qty:

View Product Details 		5 Point Race Harness (CAMS Approved) AUD$240.41
 
5 Point Race Harness, 3" webbing with Link & Latch buckle. Legal for CAMS racing. Can be used as a 4 point if required. (not required if buying HAR-4).
PART NUMBER:HAR-5
Qty:

View Product Details 		Stainless Steel Rear Brake Hose (2.8m) AUD$97.01
 
Rear brake hose, 2800mm long Stainless steel braided with banjo fitting each end.
PART NUMBER:HSE-BCR
Qty:

View Product Details 		Hydraulic Clutch Hose AUD$85.00
 
Hydraulic clutch hose, suits HYDLEVER, stainless braided with banjo fittings each end, 1900mm long.
PART NUMBER:HSE-CLH
Qty:

View Product Details 		Hydraulic Clutch Lever AUD$155.00
 
Clutch lever, hydraulic type with remote reservoir
PART NUMBER:HYDLEVER
Qty:

View Product Details 		Master Cylinder (5/8") AUD$56.00
 
Master Cylinder 5/8" girling type
PART NUMBER:MSC-01
Qty:

View Product Details 		Pedal AUD$25.00
 
Pedal, laser cut racing desgin with Acetal pivot bushes. Fits Pedal Box
PART NUMBER:PEDAL
Qty:

View Product Details 		Pedal Box Housing AUD$59.00
 
Pedal box housing used to mount pedal and master cylinder
PART NUMBER:PEDBOX
Qty:

View Product Details 		Pedal Box (Brake) AUD$135.00
 
Pedal Box complete with Pedal, Pushrod, Clevis, Master Cylinder. NOTE: We run separate Pedal Box for front & rear brakes mounted side by side. Both pedals can be pressed together & by rocking your foot you can control front & rear braking
PART NUMBER:PEDBOX-2
Qty:

View Product Details 		Pedal Box (Throttle) AUD$98.00
 
Throttle pedal box complete with pedal.
PART NUMBER:PEDBOX-3
Qty:

Gearshift Cable AUD$147.99
 
Push/Pull gearshift cable, complete with M6 female rod ends at each end, 2000mm long.
PART NUMBER:PSHPULL
Qty:

View Product Details 		Pushrod and Clevis (Master Cylinder) AUD$13.00
 
Pushrod & Clevis for Master Cylinder
PART NUMBER:PSHROD
Qty:

Racing fuel filler cap AUD$64.00
 
RCI racing fuel filler cap, flush mount, includes mounting load ring, ( mounting load ring has studs fitted & hooks up from inside the tank, nuts go on from the outside). Outer flange diameter 151mm. 12 x 1/4" UNF mount studs on 135mm PCD. Inside opening is 76mm.
PART NUMBER:RCI CAP
Qty:

Shocks 790mm, (Pair) KIT AUD$790.00
 
Shocks, coilover, gas filled heavy duty, 12mm coils, 790mm eye to eye, (2 shocks) suit front or rear of Barracuda, (2 pairs required for buggy).
PART NUMBER:SHOCK790
Qty:

SLUG-10mm AUD$5.00
 
Slug with 10mm drilled hole, 1", (25.4mm) OD. 40mm long. Used for motorcycle engine mounts that have 10mm mount holes.
PART NUMBER:SLUG-10mm
Qty:

SLUG-12mm AUD$5.00
 
Slug with 12mm drilled hole, 1", (25.4mm) OD. 40mm long. Used for motorcycle engine mounts that have 12mm mount holes. Also used as shock mounts when making Sidewinder & Piranha front suspension arms, (4 required for front arm application) Not required if purchasing Edge SW07 front suspension arms.
PART NUMBER:SLUG-12mm
Qty:

SLUG-16mm AUD$5.00
 
Slug with 16mm drilled hole, 1", (25.4mm) OD. 40mm long. Used for motorcycle engine mounts that have 16mm mount holes. Also used to make Raven, Fun Kart II & Trax II & Belcranks & lock collars, as well as the Raven brake bar. (Not required if buying these parts pre-fabricated from The Edge).
PART NUMBER:SLUG-16mm
Qty:

View Product Details 		Seat Slide AUD$142.00
 
Seat slide kit, laser cut seat slide system welds into chassis, 5 weld in plates, 2 slide plates & adjustment handle, complete with nuts, bolts & return spring.
PART NUMBER:S-SLIDE
Qty: