|
|
|
|
|
Bearings 115x75x20 (6)
60152RS-6, Bearings 115x75x20 set of 6.
Sprocket kit
Upgraded rear drive sprocket for PIRCV rear end, includes 8mm thick, steel 60 tooth 530 pitch sprocket, drive flange that fits over CV3 drive hub, 12 x M10 mounting screws, 6 x M10 Nyloc nuts, 6 x 4mm Rollpins. The flange bolts to the inside of the sprocket & uses the CV3 drive hub as a spline drive. The rollpins stop the original 6 drive screws un-winding. (all Edge CVCARTS have this kit as standard).
Front brake upgrade
Front Brake upgrade for Barracuda when fitting 15” wheels. Right & left sides. Uprights are of a new design that has increased kingpin inclination to compensate for the heavier steering induced by 15” wheels. Bigger floating rotors & Wilwood calipers.
Awesome braking power.
NOTE: ¾” master cylinder is required.
Kit Includes: 2 x FWH-04 alloy hubs, 2 x Stub axles, 2 x Wilwood calipers, 2 x 312mm diameter 6mm thick floating rotors, Bearings & seals, studs & nuts.
Rear brake upgrade kit
Brake upgrade kit for the PIRCV, (Barracuda) rear suspension. Includes: 1 x 312mm 5mm thick floating disc rotor, 1 x adjuster plate with caliper mount, 1 x large twin piston caliper.
This Brake upgrade increases braking power & solves potential issues of distorting rotors.
NOTE: All of Edge made CVCART’s are now fitted with this upgrade kit as standard, this upgrade kit is intended for older versions of the CVCART that were fitted with a solid 280mm rotor & smaller caliper.
Replacement Spring (SHOCK390)
Replacement spring for SHOCK390
|
|
|