Front brake upgrade

Front Brake upgrade for Barracuda when fitting 15” wheels. Right & left sides. Uprights are of a new design that has increased kingpin inclination to compensate for the heavier steering induced by 15” wheels. Bigger floating rotors & Wilwood calipers. Awesome braking power. NOTE: ¾” master cylinder is required. Kit Includes: 2 x FWH-04 alloy hubs, 2 x Stub axles, 2 x Wilwood calipers, 2 x 312mm diameter 6mm thick floating rotors, Bearings & seals, studs & nuts.

---

Column Pivot Bush

Column pivot bush, Urathane bush & support clamp.

---

Clutch Lever

Clutch Lever, motorcycle shorty type, fits onto ge

---

Sprocket kit

Upgraded rear drive sprocket for PIRCV rear end, includes 8mm thick, steel 60 tooth 530 pitch sprocket, drive flange that fits over CV3 drive hub, 12 x M10 mounting screws, 6 x M10 Nyloc nuts, 6 x 4mm Rollpins. The flange bolts to the inside of the sprocket & uses the CV3 drive hub as a spline drive. The rollpins stop the original 6 drive screws un-winding. (all Edge CVCARTS have this kit as standard).

---

Castor Adjuster Nuts (2)

Castor adjuster nuts, (2) fully machined.