Email:
Password:  
Taipan Options and Accessories
 

Taipan Options and Accessories
NOTE: Prices show include 10% GST, which only applies to Australian customers. USA residents will only pay approx 107% of list prices quoted due to EXCHANGE rates. Click here to check the value in your local currency.

View Product Details 		Brake Pad AUD$22.00 (save $10.00)
 13 days left!
032 PAD, Spare brake pads to suit The Edge Products CAL032 rear caliper.
PART NUMBER:032 PAD
Qty:

View Product Details 		Accelerator Pedal Spring AUD$4.00
 
Accelerator pedal spring, used on all Edge buggies.
PART NUMBER:ACCEL SPRING
Qty:

View Product Details 		Arm Restraints AUD$57.00
 
ARM RESTRAINTS, designed to stop your arms flying
PART NUMBER:ARM RESTRAIN
Qty:

View Product Details 		Banjo Bolt AUD$5.00 (save $2.00)
 13 days left!
Banjo Bolt with crush washers, M10x1.25, used to connect brake hose to master cylinder, another used to connect brake hose to Caliper.
PART NUMBER:BB-01
Qty:

View Product Details 		Fibreglass Bonnet AUD$120.00
 
Fibreglass Bonnet, designed for Taipan, Sidewinder
PART NUMBER:BONNET 1
Qty:

Chain join link 530 AUD$8.00
 
Spare Connector link for Edge CH530-114 530 O-Ring chain.
PART NUMBER:CH530 CON
Qty:

View Product Details 		Fuel Filter AUD$6.01
 
Fuel Filter, Inline plastic filter
PART NUMBER:F-FILTER
Qty:

View Product Details 		Front Wheel Bearings AUD$50.00
 
Suits all Edge buggies, (except Raven) Front wheel
PART NUMBER:FWH-BEAR
Qty:

View Product Details 		4 Point Race Harness(CAMS Approved) AUD$192.01
 
4 point Race Harness, CAMS approved, 50mm wide strapping
PART NUMBER:HAR-4
Qty:

View Product Details 		Layshaft Bearings (1" Bore) AUD$54.01
 
Layshaft Bearings, 1" bore with housings to bolt to VANMOUNT Engine Mount Plate
PART NUMBER:LAYBEAR
Qty:

View Product Details 		Layshaft (to suit 40 Series Torque Converter) AUD$58.00
 
Layshaft to suit 40 series torque converter, ¾" & keyed for driven pulley, 1" for bearings, includes 9 tooth 530 pitch sprocket.
PART NUMBER:LAYHEX 40
Qty:

View Product Details 		Layshaft (to suit 90 Series Torque Converter) AUD$52.01
 
Layshaft to suit 90 series torque converter, 1 & keyed for driven pully, includes 9 tooth 530 pitch sprocket.
PART NUMBER:LAYHEX 50
Qty:

Drive Hub (BLANK) AUD$59.00 (save $9.00)
 13 days left!
Drive hub used for disc rotor or sprocket, bored 1 1/4", (31.75mm) 10mm keyway, 120mm outside diameter, 8mm thick flange, 86mm location diameter for disc or sprocket, machined from 1045 billet steel. No hole pattern drilled so you can drill your own to suit your disc or sprocket.
PART NUMBER:MHU-BLANK
Qty:

View Product Details 		Pedal AUD$25.00
 
Pedal, laser cut racing desgin with Acetal pivot bushes. Fits Pedal Box
PART NUMBER:PEDAL
Qty:

View Product Details 		Steering Rack Boot AUD$14.00
 
Universal steering rack boot (Use to replace old boots on Mini or Escort rack & pinion)
PART NUMBER:RACKBOOT
Qty:

Set of 4 mount rubbers AUD$6.00
 
Set of 4 mounting rubbers, used as issolation mounts for fuel tanks, radiators, seats & other items, 30mm outside diameter x 15mm thick, 10mm hole. (set of 4)
PART NUMBER:RUBBERS
Qty:

Rear Wheel hubs blank AUD$96.00 (save $19.00)
 13 days left!
Wheel hub, Blank no holes, 1 1/4", (31.75mm) bore, 137mm outside diameter, 63mm location diameter, 8mm thick flange. Machined from 1045 Billet steel. No stud pattern drilled so you can drill to your own wheel pattern. Pair, (2).
PART NUMBER:RWH-BLANK
Qty:

SLUG-10mm AUD$5.00
 
Slug with 10mm drilled hole, 1", (25.4mm) OD. 40mm long. Used for motorcycle engine mounts that have 10mm mount holes.
PART NUMBER:SLUG-10mm
Qty:

SLUG-12mm AUD$5.00
 
Slug with 12mm drilled hole, 1", (25.4mm) OD. 40mm long. Used for motorcycle engine mounts that have 12mm mount holes. Also used as shock mounts when making Sidewinder & Piranha front suspension arms, (4 required for front arm application) Not required if purchasing Edge SW07 front suspension arms.
PART NUMBER:SLUG-12mm
Qty:

SLUG-16mm AUD$5.00
 
Slug with 16mm drilled hole, 1", (25.4mm) OD. 40mm long. Used for motorcycle engine mounts that have 16mm mount holes. Also used to make Raven, Fun Kart II & Trax II & Belcranks & lock collars, as well as the Raven brake bar. (Not required if buying these parts pre-fabricated from The Edge).
PART NUMBER:SLUG-16mm
Qty:

Rear Sprocket (45 tooth,530 Pitch) AUD$72.00
 
Rear Sprocket, 45 tooth, 530 Pitch, Suits Piranha PIR07 drive hub or universal MHU-01 drive hub.
PART NUMBER:SPR530-45
Qty:

View Product Details 		Fuel Tap AUD$18.01
 
Fuel tap, heavy duty ball valve, chrome plated brass with ¼” BSP female threads each end.
PART NUMBER:TAP-01
Qty:

View Product Details 		Torque Converter Drive Belt AUD$49.01
 
Spare drive belt for TAV30 or TAV2 Torque Converter
PART NUMBER:TAV BELT
Qty:

View Product Details 		Replacement Clutch (Comet TAV30/TAV2) AUD$190.00
 
Replacement engine clutch for TAV30 or TAV2 Comet
PART NUMBER:TAVCLUTCH
Qty:

View Product Details 		Industrial Engine Mount Plate AUD$62.01
 
Industrial Engine Mount Plate. This pressed plate is welded to the Chassis, the motor & torque converter then bolt up to the plate. This mount plate accepts 9,11,13,14,16,18 or 20hp Vanguard motors & accepts 40 & 90 series torque converters.
PART NUMBER:VANMOUNT
Qty:

View Product Details 		Wheel Nut AUD$1.50
 
Spare 7/16” UNF wheelnuts
PART NUMBER:WHEELNUT
Qty:

View Product Details 		Wheel Stud AUD$2.00
 
Spare 7/16”UNF knurled head wheel studs
PART NUMBER:WHEELSTUD
Qty:

View Product Details 		Rack and Pinion, KIT AUD$415.00 (save $45.01)
 13 days left!
Rack and Pinion. 1/2 turn lock, with adjustable gear mesh. Includes tie rods to suit Sidewinder and Piranha as well as input shaft adaptor
PART NUMBER:XRV RACK
Qty: