Email:
Password:  
Taipan General Components
 

Taipan General Components
NOTE: Prices show include 10% GST, which only applies to Australian customers. USA residents will only pay approx 107% of list prices quoted due to EXCHANGE rates. Click here to check the value in your local currency.

View Product Details 		Accelerator Pedal Spring AUD$4.00
 
Accelerator pedal spring, used on all Edge buggies.
PART NUMBER:ACCEL SPRING
Qty:

View Product Details 		Rear Axle AUD$275.00
 
AXL-02, Rear Axle, 1120mm long, 4140 steel with keyways & wheel hubs fitted. comes with Mini, (101.6mm) four stud pattern. Please advise if you require a different stud pattern
PART NUMBER:AXL-02
Qty:

View Product Details 		10mm Studded Rod End AUD$14.00
 
10mm studded rod end used on gear change linkage (
PART NUMBER:BL10D-1
Qty:

View Product Details 		Fibreglass Bonnet AUD$120.00
 
Fibreglass Bonnet, designed for Taipan, Sidewinder
PART NUMBER:BONNET 1
Qty:

View Product Details 		530 Pitch Drive Chain AUD$68.00
 
Drive Chain, 530 pitch, Heavy duty motorcycle O-ring chain, 114 links with connector, 7500 psi tensile rating.
PART NUMBER:CH530-114
Qty:

View Product Details 		35-2 3/8" Pitch Drive Chain (Double Row) AUD$32.01
 
35-2 3/8" pitch double row chain, 100 links with connector
PART NUMBER:CH-352-100
Qty:

View Product Details 		Clutch Lever AUD$22.00
 
Clutch Lever, motorcycle shorty type, fits onto ge
PART NUMBER:C-LEVER
Qty:

View Product Details 		Disc Brake Rotor (4mm/240mm) AUD$55.00
 
Disc Brake Rotor, steel, 240 dia , 4mm thick, slotted, suits MHU-01 Drive Hub, suits most motorcycle motors
PART NUMBER:DBR-02
Qty:

View Product Details 		High Back Rally Seat AUD$265.00
 
High back rally seat, fibreglass, smooth internal finish, black colour. Mounts through seat base.
PART NUMBER:EP17
Qty:

View Product Details 		4 Point Race Harness(CAMS Approved) AUD$192.01
 
4 point Race Harness, CAMS approved, 50mm wide strapping
PART NUMBER:HAR-4
Qty:

View Product Details 		Layshaft Bearings (1" Bore) AUD$54.01
 
Layshaft Bearings, 1" bore with housings to bolt to VANMOUNT Engine Mount Plate
PART NUMBER:LAYBEAR
Qty:

View Product Details 		Layshaft (to suit 40 Series Torque Converter) AUD$58.00
 
Layshaft to suit 40 series torque converter, ¾" & keyed for driven pulley, 1" for bearings, includes 9 tooth 530 pitch sprocket.
PART NUMBER:LAYHEX 40
Qty:

View Product Details 		Layshaft (to suit 90 Series Torque Converter) AUD$52.01
 
Layshaft to suit 90 series torque converter, 1 & keyed for driven pully, includes 9 tooth 530 pitch sprocket.
PART NUMBER:LAYHEX 50
Qty:

View Product Details 		Drive Hub AUD$79.00
 
Drive Hub, Billet solid steel 1 ¼" Bore, 4 x 10mm holes on 4" (101.6) PCD. (Suits Disc Rotor & Drive Sprocket)
PART NUMBER:MHU-01
Qty:

Drive Hub (BLANK) AUD$59.00 (save $9.00)
 13 days left!
Drive hub used for disc rotor or sprocket, bored 1 1/4", (31.75mm) 10mm keyway, 120mm outside diameter, 8mm thick flange, 86mm location diameter for disc or sprocket, machined from 1045 billet steel. No hole pattern drilled so you can drill your own to suit your disc or sprocket.
PART NUMBER:MHU-BLANK
Qty:

View Product Details 		Rear Axle Bearing Housings (Pair) AUD$27.01
 
Rear Axle Bearing housings, 1 pair
PART NUMBER:P206
Qty:

View Product Details 		Pedal AUD$25.00
 
Pedal, laser cut racing desgin with Acetal pivot bushes. Fits Pedal Box
PART NUMBER:PEDAL
Qty:

View Product Details 		Pedal Box (Brake) AUD$135.00
 
Pedal Box complete with Pedal, Pushrod, Clevis, Master Cylinder. NOTE: We run separate Pedal Box for front & rear brakes mounted side by side. Both pedals can be pressed together & by rocking your foot you can control front & rear braking
PART NUMBER:PEDBOX-2
Qty:

View Product Details 		Pedal Box (Throttle) AUD$98.00
 
Throttle pedal box complete with pedal.
PART NUMBER:PEDBOX-3
Qty:

View Product Details 		Rose Joint End (8mm) AUD$15.00
 
8mm female Rose Joint End, used on motorcycle gearchange linkage
PART NUMBER:PH585B
Qty:

View Product Details 		Taipan Front Axle Beam AUD$60.01
 
Front Axle Beam, fully welded. (Not required if ordering Chassis)
PART NUMBER:PN02
Qty:

View Product Details 		Front Stub Axles AUD$82.00
 
Front Stub Axles, left & right, welded & drilled with uprights & steering arms
PART NUMBER:PN03
Qty:

View Product Details 		Throttle Cable (2300mm) AUD$34.00
 
Throttle cable, 2.3 metres long, can be trimmed to length
PART NUMBER:PN07
Qty:

View Product Details 		Rollbars AUD$215.00
 
Rollbars, front & rear, (not required if ordering chassis)
PART NUMBER:ROLL2
Qty:

View Product Details 		Rear Wheel Hubs AUD$132.00
 
Rear wheel hubs only, Machined from solid 1045 bar, 1 1/4” bore, 4 stud 101.6mm PCD with studs & nuts. Please advise if you require a different stud pattern. (hubs not required if ordering rear axle).
PART NUMBER:RWH-02
Qty:

Rear Wheel hubs blank AUD$96.00 (save $19.00)
 13 days left!
Wheel hub, Blank no holes, 1 1/4", (31.75mm) bore, 137mm outside diameter, 63mm location diameter, 8mm thick flange. Machined from 1045 Billet steel. No stud pattern drilled so you can drill to your own wheel pattern. Pair, (2).
PART NUMBER:RWH-BLANK
Qty:

SLUG-10mm AUD$5.00
 
Slug with 10mm drilled hole, 1", (25.4mm) OD. 40mm long. Used for motorcycle engine mounts that have 10mm mount holes.
PART NUMBER:SLUG-10mm
Qty:

SLUG-12mm AUD$5.00
 
Slug with 12mm drilled hole, 1", (25.4mm) OD. 40mm long. Used for motorcycle engine mounts that have 12mm mount holes. Also used as shock mounts when making Sidewinder & Piranha front suspension arms, (4 required for front arm application) Not required if purchasing Edge SW07 front suspension arms.
PART NUMBER:SLUG-12mm
Qty:

SLUG-16mm AUD$5.00
 
Slug with 16mm drilled hole, 1", (25.4mm) OD. 40mm long. Used for motorcycle engine mounts that have 16mm mount holes. Also used to make Raven, Fun Kart II & Trax II & Belcranks & lock collars, as well as the Raven brake bar. (Not required if buying these parts pre-fabricated from The Edge).
PART NUMBER:SLUG-16mm
Qty:

View Product Details 		Rear Drive Sprocket (82 tooth,35-1,38") AUD$45.00
 
Rear Drive Sprocket 82 tooth, 35-1, 3/8" pitch steel (suits mount hub: MHU-01)
PART NUMBER:SPR-01
Qty:

View Product Details 		Rear Sprocket (50 tooth,530 Pitch) AUD$72.00
 
Rear Sprocket, 50 tooth, 530 pitch, Suits Piranha PIR07 drive hub or Sidewinder MHU-01, Has mount holes for Sidewinder SPROK GUIDE plates (use either 50, 51, 55 or 60 tooth sprocket).
PART NUMBER:SPR530-50
Qty:

View Product Details 		Stub Axles plain machined. AUD$48.00
 
Machined pair of plain stub axles, comes with castle nuts, washers & split pins, (not required if ordering STUB032)
PART NUMBER:STUB-01
Qty:

View Product Details 		Caliper Mount Bracket AUD$28.00
 
Brake calliper mount bracket, suits CAL032 caliper
PART NUMBER:TX032
Qty:

View Product Details 		Rear Axle Bearings AUD$33.00 (save $7.00)
 13 days left!
Rear Axle Bearings 1 ¼", 1 pair
PART NUMBER:UC206
Qty:

View Product Details 		Industrial Engine Mount Plate AUD$62.01
 
Industrial Engine Mount Plate. This pressed plate is welded to the Chassis, the motor & torque converter then bolt up to the plate. This mount plate accepts 9,11,13,14,16,18 or 20hp Vanguard motors & accepts 40 & 90 series torque converters.
PART NUMBER:VANMOUNT
Qty: