Email:
Password:  
Sidewinder Options And Accessories
 

Sidewinder Options And Accessories
NOTE: Prices show include 10% GST, which only applies to Australian customers. USA residents will only pay approx 107% of list prices quoted due to EXCHANGE rates. Click here to check the value in your local currency.

View Product Details 		Brake Pad AUD$22.00 (save $10.00)
 13 days left!
032 PAD, Spare brake pads to suit The Edge Products CAL032 rear caliper.
PART NUMBER:032 PAD
Qty:

View Product Details 		Accelerator Pedal Spring AUD$4.00
 
Accelerator pedal spring, used on all Edge buggies.
PART NUMBER:ACCEL SPRING
Qty:

View Product Details 		Arm Restraints AUD$57.00
 
ARM RESTRAINTS, designed to stop your arms flying
PART NUMBER:ARM RESTRAIN
Qty:

View Product Details 		Banjo Bolt AUD$5.00 (save $2.00)
 13 days left!
Banjo Bolt with crush washers, M10x1.25, used to connect brake hose to master cylinder, another used to connect brake hose to Caliper.
PART NUMBER:BB-01
Qty:

View Product Details 		Double Banjo Bolt AUD$9.00
 
Double Banjo bolt, M10x1.25, adapts two front brake hoses to master cylinder. Comes with three crush washers.
PART NUMBER:BB-03
Qty:

View Product Details 		Fibreglass Bonnet AUD$120.00
 
Fibreglass Bonnet, designed for Taipan, Sidewinder
PART NUMBER:BONNET 1
Qty:

View Product Details 		Front Brake Kit AUD$650.00 (save $100.00)
 13 days left!
All the above parts to set up Front Brakes, including FWH-04 hubs, DBR032 rotors, CAL032 calipers, BB-01 banjo bolts, STUB032 stub axles, HSE-03 front brake hoses, BB-03 double banjo bolt, PEDBOX-2 brake pedal box, all nuts & bolts. For front left & right hand wheels. Suits Sidewinder & Piranha
PART NUMBER:BRAKE KIT
Qty:

View Product Details 		Brake Caliper (Twin Piston) (Pair) AUD$170.00 (save $99.99)
 13 days left!
Brake Calipers, matching pair alloy twin piston calipers, right & left sides, for front brakes
PART NUMBER:CAL032x2
Qty:

View Product Details 		Front Disc Rotors AUD$80.00
 
Front Disc Rotors, 180mm dia, 4mm steel slotted, suits FWH-04 Front Wheel Disc Hubs only. Suits Sidewinder, Piranha & Barracuda.
PART NUMBER:DBR032
Qty:

View Product Details 		Double Roller Chain Tensioner AUD$98.01
 
Chain Tensioner, Double Roller. Self compensates chain snatch
PART NUMBER:EP15
Qty:

EXHAUST MUFFLER FLANGE AUD$15.00
 
Exhaust flange to suit muffler mount. Welds on the end of exhaust system, 3 hole pattern matches Hayabusa muffler, 2 1/2" hole, 6mm thick plate.
PART NUMBER:EX-FLANGE
Qty:

View Product Details 		Fuel Filter AUD$6.01
 
Fuel Filter, Inline plastic filter
PART NUMBER:F-FILTER
Qty:

View Product Details 		Front Wheel Bearings AUD$50.00
 
Suits all Edge buggies, (except Raven) Front wheel
PART NUMBER:FWH-BEAR
Qty:

View Product Details 		4 Point Race Harness(CAMS Approved) AUD$192.01
 
4 point Race Harness, CAMS approved, 50mm wide strapping
PART NUMBER:HAR-4
Qty:

View Product Details 		5 Point Race Harness (CAMS Approved) AUD$240.41
 
5 Point Race Harness, 3" webbing with Link & Latch buckle. Legal for CAMS racing. Can be used as a 4 point if required. (not required if buying HAR-4).
PART NUMBER:HAR-5
Qty:

View Product Details 		Stainless Steel Hydraulic Brake Hose (2.1m) AUD$68.00 (save $24.00)
 13 days left!
Hydraulic Brake Hose, stainless steel braided, 2.1 metres long with Banjo fittings each end
PART NUMBER:HSE-01
Qty:

View Product Details 		Front Hose Setup AUD$77.00 (save $18.01)
 13 days left!
Front Hose set up. Runs from Master Cylinder to both front calipers, braided stainless hose, 2 individual hoses.
PART NUMBER:HSE-03
Qty:

Drive Hub (BLANK) AUD$59.00 (save $9.00)
 13 days left!
Drive hub used for disc rotor or sprocket, bored 1 1/4", (31.75mm) 10mm keyway, 120mm outside diameter, 8mm thick flange, 86mm location diameter for disc or sprocket, machined from 1045 billet steel. No hole pattern drilled so you can drill your own to suit your disc or sprocket.
PART NUMBER:MHU-BLANK
Qty:

View Product Details 		Sports Bike Muffler AUD$380.00
 
Stainless steel sports bike muffler, Hayabusa 3 hole mount flange.
PART NUMBER:MUFFLER-SS
Qty:

View Product Details 		Pedal AUD$25.00
 
Pedal, laser cut racing desgin with Acetal pivot bushes. Fits Pedal Box
PART NUMBER:PEDAL
Qty:

View Product Details 		Pedal Box (Brake) AUD$135.00
 
Pedal Box complete with Pedal, Pushrod, Clevis, Master Cylinder. NOTE: We run separate Pedal Box for front & rear brakes mounted side by side. Both pedals can be pressed together & by rocking your foot you can control front & rear braking
PART NUMBER:PEDBOX-2
Qty:

View Product Details 		Steering Rack Boot AUD$14.00
 
Universal steering rack boot (Use to replace old boots on Mini or Escort rack & pinion)
PART NUMBER:RACKBOOT
Qty:

Rack & Pinion gear set AUD$185.00
 
Spare rack & pinion gearset to suit Edge rack & pinion, made from heat treated & ground 4140 steel.
PART NUMBER:RACKGEAR
Qty:

View Product Details 		XRV Rack and Pinion Mount Plate AUD$22.00
 
Rack and Pinion weld in mount plate to suit XRV Rack and Pinion for Sidewinder and Piranha
PART NUMBER:RACKMNT
Qty:

Racing fuel filler cap AUD$64.00
 
RCI racing fuel filler cap, flush mount, includes mounting load ring, ( mounting load ring has studs fitted & hooks up from inside the tank, nuts go on from the outside). Outer flange diameter 151mm. 12 x 1/4" UNF mount studs on 135mm PCD. Inside opening is 76mm.
PART NUMBER:RCI CAP
Qty:

View Product Details 		Spare Tensioner Roller AUD$25.00
 
Spare tensioner roller, 50mm radius Acetal (nylon) with 8mm roller bearings
PART NUMBER:ROLLER
Qty:

Set of 4 mount rubbers AUD$6.00
 
Set of 4 mounting rubbers, used as issolation mounts for fuel tanks, radiators, seats & other items, 30mm outside diameter x 15mm thick, 10mm hole. (set of 4)
PART NUMBER:RUBBERS
Qty:

SLUG-10mm AUD$5.00
 
Slug with 10mm drilled hole, 1", (25.4mm) OD. 40mm long. Used for motorcycle engine mounts that have 10mm mount holes.
PART NUMBER:SLUG-10mm
Qty:

SLUG-12mm AUD$5.00
 
Slug with 12mm drilled hole, 1", (25.4mm) OD. 40mm long. Used for motorcycle engine mounts that have 12mm mount holes. Also used as shock mounts when making Sidewinder & Piranha front suspension arms, (4 required for front arm application) Not required if purchasing Edge SW07 front suspension arms.
PART NUMBER:SLUG-12mm
Qty:

SLUG-16mm AUD$5.00
 
Slug with 16mm drilled hole, 1", (25.4mm) OD. 40mm long. Used for motorcycle engine mounts that have 16mm mount holes. Also used to make Raven, Fun Kart II & Trax II & Belcranks & lock collars, as well as the Raven brake bar. (Not required if buying these parts pre-fabricated from The Edge).
PART NUMBER:SLUG-16mm
Qty:

Rear Sprocket (45 tooth,530 Pitch) AUD$72.00
 
Rear Sprocket, 45 tooth, 530 Pitch, Suits Piranha PIR07 drive hub or universal MHU-01 drive hub.
PART NUMBER:SPR530-45
Qty:

View Product Details 		Sprocket Guide Plates AUD$50.01
 
Guide plates to fit either side of SPR530-50 or SPR530-51 sprocket to stop chain climbing off. Kit comes with 2X side plates, stand-off spacers & bolts. Used only on Sidewinder
PART NUMBER:SPROK GUIDE
Qty:

View Product Details 		Front Stub Axles (w/ Caliper mounts) AUD$105.00
 
Front Stub axles, left & right, welded & drilled with uprights & steering arms, calliper mounts (2). Suit calipers CAL032x2 & wheel hubs FWH-04. Suits Sidewinder & Piranha.
PART NUMBER:STUB032
Qty:

View Product Details 		Fuel Tap AUD$18.01
 
Fuel tap, heavy duty ball valve, chrome plated brass with ¼” BSP female threads each end.
PART NUMBER:TAP-01
Qty:

View Product Details 		Tie Down Straps AUD$30.01
 
Motorcycle type Tie Down Straps. We use them for fixing down fuel tanks & for holding your vehicle on the trailer
PART NUMBER:TIEDOWN
Qty:

View Product Details 		Wheel Nut AUD$1.50
 
Spare 7/16” UNF wheelnuts
PART NUMBER:WHEELNUT
Qty:

View Product Details 		Wheel Stud AUD$2.00
 
Spare 7/16”UNF knurled head wheel studs
PART NUMBER:WHEELSTUD
Qty:

View Product Details 		Rack and Pinion, KIT AUD$415.00 (save $45.01)
 13 days left!
Rack and Pinion. 1/2 turn lock, with adjustable gear mesh. Includes tie rods to suit Sidewinder and Piranha as well as input shaft adaptor
PART NUMBER:XRV RACK
Qty: