Email:
Password:  
Barracuda Steering
 

NOTE: Prices show include 10% GST, which only applies to Australian customers. USA residents will only pay approx 107% of list prices quoted due to EXCHANGE rates. Click here to check the value in your local currency.

View Product Details 		Banjo Bolt AUD$5.00 (save $2.00)
 13 days left!
Banjo Bolt with crush washers, M10x1.25, used to connect brake hose to master cylinder, another used to connect brake hose to Caliper.
PART NUMBER:BB-01
Qty:

View Product Details 		Double Banjo Bolt AUD$9.00
 
Double Banjo bolt, M10x1.25, adapts two front brake hoses to master cylinder. Comes with three crush washers.
PART NUMBER:BB-03
Qty:

View Product Details 		Front Suspension Uprights AUD$165.00
 
Front suspension uprights, fully welded, (2)
PART NUMBER:BC10
Qty:

View Product Details 		Front Upright Kit (Unwelded) AUD$78.00
 
Front upright laser cut kit, unwelded, 12 plates,
PART NUMBER:BC11
Qty:

View Product Details 		Tie Rods (2) AUD$78.00
 
Tie rods to suit XRV rack & pinion, (2).
PART NUMBER:BC13
Qty:

View Product Details 		Steering Column BC15 AUD$95.00
 
Steering column, as per plans, with XRV rack adapt & SB04 flange fitted.
PART NUMBER:BC15
Qty:

View Product Details 		Barracuda Front Brake Kit AUD$750.00 (save $124.99)
 13 days left!
Front brake kit, Suits 10" or 12" rims. includes BC10 welded uprights, FWH-04 hubs, CAL032x2 Calipers, DBR032 Rotors, HSE-06 Hoses, BB-03 Double banjo bolt, PEDBOX-2.
PART NUMBER:BCBRAKE
Qty:

Upgrade Front brake kit for Barracuda AUD$775.00 (save $100.00)
 13 days left!
Barracuda Upgrade front brake kit to suit 12" rims. Larger 207mm rotors & larger twin piston calipers. Kit includes 2 x welded uprights, 2 x FWH-04 hubs, 2 x CALXVS Calipers, 2 x DBRXVS Rotors, HSE-06 Hoses, BB-03 Double banjo bolt, PEDBOX-2.
PART NUMBER:BCBRAKE XVS
Qty:

View Product Details 		Rack and Pinion Mount AUD$34.00
 
Laser cut rack & pinion mount, 3 plates, (not requ
PART NUMBER:BCRACK
Qty:

View Product Details 		Brake Caliper (Twin Piston) (Pair) AUD$170.00 (save $99.99)
 13 days left!
Brake Calipers, matching pair alloy twin piston calipers, right & left sides, for front brakes
PART NUMBER:CAL032x2
Qty:

View Product Details 		Column Pivot Bush AUD$20.00
 
Column pivot bush, Urathane bush & support clamp.
PART NUMBER:CLMNBSH
Qty:

View Product Details 		Front Disc Rotors AUD$80.00
 
Front Disc Rotors, 180mm dia, 4mm steel slotted, suits FWH-04 Front Wheel Disc Hubs only. Suits Sidewinder, Piranha & Barracuda.
PART NUMBER:DBR032
Qty:

View Product Details 		Front Wheel Hubs (with Disc Rotor Mount) AUD$165.00
 
Front Wheel hubs with disc rotor mount, alloy, 4 Stud 156mm PCD, 7/16" UNF Studs, nuts, taper roller bearings & seals.
PART NUMBER:FWH-04
Qty:

View Product Details 		Pedal Box (Brake) AUD$135.00
 
Pedal Box complete with Pedal, Pushrod, Clevis, Master Cylinder. NOTE: We run separate Pedal Box for front & rear brakes mounted side by side. Both pedals can be pressed together & by rocking your foot you can control front & rear braking
PART NUMBER:PEDBOX-2
Qty:

View Product Details 		Rack and Pinion AUD$419.99
 
Performance XRV Rack & Pinion, with adjustable gear mesh. Comes with 4 x M8x40 capscrews & nuts.To suit Barracuda.
PART NUMBER:RACK
Qty:

Rack & Pinion gear set AUD$185.00
 
Spare rack & pinion gearset to suit Edge rack & pinion, made from heat treated & ground 4140 steel.
PART NUMBER:RACKGEAR
Qty:

View Product Details 		XRV Rack and Pinion Adaptor AUD$37.99
 
XRV rack & pinion adaptor, adapts column to XRV rack & pinion, machined steel, comes with 8mm Rollpin (1) (not needed if ordering BC15).
PART NUMBER:RAKADP
Qty:

View Product Details 		Steering Wheel Flange (6.5mm/74mm) AUD$16.01
 
Steering wheel flange, 6 x 6.5mm holes on 74mm PCD, (not required if ordering SB04).
PART NUMBER:SB03
Qty:

View Product Details 		Steering Wheel Flange (5.5mm/70mm) AUD$16.01
 
Steering wheel flange, 6 x 5.5mm holes on 70mm PCD, (not required if ordering SB03).
PART NUMBER:SB04
Qty:

Steering wheel flange AUD$16.00
 
Steering wheel flange, has outer bolt pattern of 6 x 5.5mm holes on 70mm PCD as well as inner three hole Go Kart bolt pattern. Can either be welded to steering column as per normal instalation or used as an adaptor plate from three hole to six hole when fitting a larger steering wheel.
PART NUMBER:SB05
Qty:

View Product Details 		13.5" Steering Wheel AUD$125.00
 
Steering wheel, 13.5” 3 spoke, contoured thumb grips, suits SB04 or SB05 Flange.
PART NUMBER:STW-02
Qty: